The JAMB syllabus for Physics is the official list of 40 topics, from measurements and units to fibre optics and lasers, that JAMB uses to set the UTME Physics paper. It’s one of the longest UTME syllabuses, and that’s exactly why you need it: with so much ground to cover, the syllabus tells you where the boundaries are and which skills each topic tests.

This page gives you the complete official syllabus, reproduced word for word and in the same order JAMB published it. Around it you’ll find a topic map grouped into study blocks, the formulas the syllabus expects you to use, worked examples in UTME style, a 12-week plan and answers to the questions Physics candidates ask most.

Quick answer: JAMB Physics syllabus

  • Size: 40 numbered topics, running from 1. Measurements and Units to 40. Introduction to fibre optics and lasers.
  • Main areas: mechanics; heat and properties of matter; waves, sound and light; electricity and magnetism; modern physics and electronics.
  • Exam format: computer-based, multiple-choice. Use of English carries 60 questions and each other subject, Physics included, is widely set at 40.
  • What it rewards: applying formulas correctly, handling units, and interpreting graphs and diagrams.
  • Official source: JAMB’s syllabuses and brochure are published on its own platforms at jamb.gov.ng.

In this guide:

JAMB Physics syllabus at a glance

The official document lists its 40 topics in one long sequence without section headings. To make it easier to plan, we’ve grouped them into five study blocks. The topic names and numbers are JAMB’s; the grouping is ours.

Study block Syllabus topics (JAMB numbering) Topics
Mechanics 1 Measurements and units; 2 Scalars and vectors; 3 Motion; 4 Gravitational field; 5 Equilibrium of forces; 6 Friction; 7 Work, energy and power; 8 Simple machines; 9 Elasticity; 10 Pressure; 11 Liquids at rest 11
Heat and properties of matter 12 Temperature and its measurement; 13 Quantity of heat; 14 Change of state; 15 Thermal expansion; 16 Gas laws; 17 Vapours; 18 Structure of matter and kinetic theory; 19 Heat transfer 8
Waves, sound and light 20 Waves; 21 Propagation of sound waves; 22 Characteristics of sound waves; 23 Light energy; 24 Reflection; 25 Refraction; 26 Optical instruments; 27 Dispersion of light and colours 8
Electricity and magnetism 28 Electrostatics; 29 Capacitors; 30 Electric cells; 31 Current electricity; 32 Electrical energy and power; 33 Magnets and magnetic fields; 34 Force on a current-carrying conductor; 35 Electromagnetic induction; 36 Simple a.c. circuits; 37 Conduction of electricity through liquids and gases 10
Modern physics and electronics 38 Elementary modern physics; 39 Introductory electronics; 40 Introduction to fibre optics and lasers 3

Mechanics and electricity together make up more than half of the syllabus. They’re also the blocks where formulas and units matter most, so they deserve the largest share of your study time.

What JAMB expects from you

The syllabus lists four course objectives. Read them as instructions about the kind of questions you’ll face.

  • “Sustain their interest in physics.” Questions often connect physics to real life: why a pressure cooker cooks faster, how a refrigerator works, why the sky looks blue. The syllabus objectives keep asking you to “identify applications” and “relate” ideas to everyday situations.
  • “Develop attitude relevant to physics that encourage accuracy, precision and objectivity.” Measurement errors, significant figures and correct units are tested directly in topic 1 and indirectly everywhere else.
  • “Interpret physical phenomena, laws, definitions, concepts and other theories.” Expect “which of these statements is correct?” questions about laws such as Hooke’s law, Boyle’s law, Snell’s law and Lenz’s law.
  • “Demonstrate the ability to solve correctly physics problems.” Most of the right-hand column says “solve problems”, “calculate” or “determine”. Numerical questions are the backbone of the paper.

The official JAMB Physics syllabus (full text)

Below is the complete JAMB UTME syllabus for Physics, reproduced word for word from JAMB’s official syllabus document. It keeps the original structure: general objectives, then the detailed syllabus in two columns (Topics/Contents/Notes and Objectives), then the recommended texts. Equations that were printed as images of formulas in the source are written out in plain text with the same symbols.

PHYSICS

GENERAL OBJECTIVES

The aim of the Unified Tertiary Matriculation Examination (UTME) syllabus in Physics is to prepare the candidates for the Board’s examination. It is designed to test their achievement of the course objectives, which are to:

(1) sustain their interest in physics;

(2) develop attitude relevant to physics that encourage accuracy, precision and objectivity;

(3) interpret physical phenomena, laws, definitions, concepts and other theories;

(4) demonstrate the ability to solve correctly physics problems using relevant theories and concepts.

DETAILED SYLLABUS

TOPICS/CONTENTS/NOTES OBJECTIVES
1. MEASUREMENTS AND UNITS
(ai) Fundamental Units:
Length, mass, time, electric charge, temperature, luminous intensity, amount of substance. (aii) Derived Units:
Weight, area, volume, force, speed etc.
(b) Measuring Instruments: venier caliper, metre rule, micrometer screw gauge, measuring cylinder, stop watch and beam balance.
(c) Fundamental physical quantities
(d) Derived physical quantities and their units
(i) Combinations of fundamental quantities and determination of their units;
(e) Dimensions
(i) definition of dimensions
(ii) simple examples
(f) Limitations of experimental measurements
(i) accuracy of measuring instruments;
(ii) simple estimation of errors;
(iii) significant figures;
(iv) standard form.
Candidates should be able to:
i. identify the units of length, area and volume;
ii. use different measuring instruments;
iii. determine the lengths, surface areas and volume of regular and irregular bodies;
iv. identify the unit of mass;
v. use simple beam balance, e.g.
Buchart’s balance and chemical balance;
vi. identify the unit of time;
vii. use different time-measuring devices;
viii. relate the fundamental physical quantities to their units;
ix. deduce the units of derived physical quantities;
x. determine the dimensions of physical quantities;
xi. use the dimensions to determine the units of physical quantities;
xii. test the homogeneity of an equation;
xiii. determine the accuracy of measuring instruments;
xiv. estimate simple errors;
xv. express measurements in standard form.
(2a) Scalars and Vectors
(i) definition of scalar and vector quantities;
(ii) examples of scalar and vector quantities;
(iii) relative velocity;
(iv) resolution of vectors into two perpendicular directions including graphical methods of solution.
Candidates should be able to:
i. distinguish between scalar and vector quantities;
ii. give examples of scalar and vector quantities;
iii. determine the resultant of two or more vectors;
iv. determine relative velocity;
v. resolve vectors into two perpendicular components;
vi. use graphical methods to solve vector problems.
(2b) Measurement, position, distance and displacement
(a) concept of displacement;
(ii) distinction between distance and displacement;
(iii) concept of position and coordinates;
(iv) frame of reference.
Candidates should be able to:
i. use strings, meter rule and engineering calipers, vernier calipers and micrometer, screw guage;
ii. note the degree of accuracy;
iii. identify distance travel in a specified direction;
iv. use compass and protractor to locate points/directions;
v. use Cartesians systems to locate positions in x-y plane;
vi. plot graph and draw inference from the graph.
(3.) Motion
(a) Newton’s laws of motion:
(i) inertia, mass and force;
(ii) relationship between mass and acceleration;
(iii) impulse and momentum;
(iv) force – time graph;
(v) conservation of linear momentum (Coefficient of restitution not necessary).
(b)Types of motion: translational, oscillatory, rotational, spin and random
(c) Relative motion
(d) Causes of motion
(e) Types of force
(i) contact
(ii) force field
(f) linear motion
(i) speed, velocity and acceleration;
(ii) equations of uniformly accelerated motion;
(iii) motion under gravity;
(iv) distance-time graph and velocity time graph;
(v) instantaneous velocity and acceleration.
(g) Projectiles:
(i) calculation of range, maximum height and time of flight from the ground and a height;
(ii) applications of projectile motion.
(h) Motion in a circle:
(i) angular velocity and angular acceleration;
(ii) centripetal and centrifugal forces;
(iii) applications.
(i) Simple Harmonic Motion (S.H.M):
(i) definition and explanation of simple harmonic motion;
(ii) examples of systems that execute
S.H.M;
(iii) period, frequency and amplitude of
S.H.M;
(iv) velocity and acceleration of S.H.M;
(i) simple treatment of energy change in
S.H.M;
(ii) force vibration and resonance (simple treatment).
Candidates should be able to;
i. identify different types of motion;
ii. solve numerical problem on collinear motion;
iii. identify force as cause of motion;
iv. identify push and pull as forms of force;
v. identify electric and magnetic attractions, gravitational pull as forms of field forces;
vi. differentiate between speed, velocity and acceleration;
vii. deduce equations of uniformly accelerated motion;
viii. solve problems of motion under gravity;
ix. interpret distance-time graph and velocity-time graph;
x. compute instantaneous velocity and acceleration;
xi. establish expressions for the range, maximum height and time of flight of projectiles, rockets, missles;
xii. solve problems involving projectile motion;
xiii. solve numerical problems involving impulse and momentum;
xiv. interpretation of area under force – time graph;
xv. interpret Newton’s laws of motion;
xvi. compare inertia, mass and force;
xvii. deduce the relationship between mass and acceleration;
xviii. interpret the law of conservation of linear momentum and application;
xix. establish expression for angular velocity, angular acceleration and centripetal force;
xx. solve numerical problems involving motion in a circle;
xxi. establish the relationship between period and frequency;
xxii. analyse the energy changes occurring during S.H.M;
xxiii. identify different types of forced vibration;
xxiv. enumerate applications of resonance.
4 Gravitational field
(i) Newton’s law of universal gravitation;
(ii) gravitational potential;
(iii) conservative and non-conservative fields;
(iv) acceleration due to gravity;
(v) variation of g on the earth’s surface;
(vi) distinction between mass and weight escape velocity;
(vii) parking orbit and weightlessness.
Candidates should be able to:
i. identify the expression for gravitational force between two bodies;
ii. apply Newton’s law of universal gravitation;
iii. give examples of conservative and non-conservative fields;
iv. deduce the expression for gravitational field potentials;
v. identify the causes of variation of g on the earth’s surface;
vi. differentiate between mass and weight;
vii. determine escape velocity.
viii. Relate the expression for gravitational force between two bodies
ix. Apply Newton’s law of Universal gravitation.
5. Equilibrium of Forces
(a) equilibrium of particles:
(i) equilibrium of coplanar forces;
(ii) triangles and polygon of forces;
(iii) Lami’s theorem.
(b) principles of moments
(i) moment of a force;
(ii) simple treatment and moment of a couple (torque);
(iii) applications.
(c) conditions for equilibrium of rigid bodies under the action of parallel and non-parallel forces
(i) resolution and composition of forces in two perpendicular directions;
(ii) resultant and equilibrant.
(d) centre of gravity and stability
(i) stable, unstable and neutral equilibra.
(6) Friction
Candidates should be able to:
i. apply the conditions for the equilibrium of coplanar forces to solve problems;
ii. use triangle and polygon laws of forces to solve equilibrium problems;
iii. use Lami’s theorem to solve problems;
iv. analyse the principle of moment of a force;
v. determine moment of a force and couple;
vi. describe some applications of moment of a force and couple;
vii. apply the conditions for the equilibrium of rigid bodies to solve problems;
viii. resolve forces into two perpendicular directions;
ix. determine the resultant and equilibrant of forces;
x. differentiate between stable, unstable and neutral equilibra.
(i) static and dynamic friction;
(ii) coefficient of limiting friction and its determination;
(iii) advantages and disadvantages of friction
(iv) reduction of friction;
(v) qualitative treatment of viscosity and terminal velocity;
(vi) Stoke’s law.
(7) (a) Work, Energy and Power
(i) definition of work, energy and power;
Candidates should be able to:
i. differentiate between static and dynamic friction;
ii. determine the coefficient of limiting friction;
iii. compare the advantages and disadvantages of friction;
iv. suggest ways by which friction can be reduced;
v. analyse factors that affect viscosity and terminal velocity;
vi. apply Stoke’s law.
(ii) forms of energy;
(iii) conservation of energy;
(iv) qualitative treatment between different forms of energy;
(v) interpretation of area under the force-distance curve.
(b) Energy and society
(i) sources of energy;
(ii) renewable and non-renewable energy e.g., coal, crude oil sun, wind etc.;
(iii) uses of energy;
(iv) energy and development;
(v) energy diversification;
(vi) environmental impact of energy e.g., global warming, greenhouse effect and spillage;
(vii) energy crises;
(viii) conversion of energy;
(ix) devices used in energy production.
(c) Dams and energy production
(i) location of dams
(ii) energy production
(d) nuclear energy
(e) solar energy
(i) photoelectric effect
(ii) solar collector;
(iii) solar panel for energy supply.
Candidates should be able to:
i. differentiate between work, energy and power;
ii. compare different forms of energy, giving examples;
iii. apply the principle of conservation of energy;
iv. examine the transformation between different forms of energy;
v. interpret the area under the force – distance curve.
vi. solve numerical problems in work, energy and power.
vii. itemize the sources of energy;
viii. distinguish between renewable and non- renewable energy, examples should be given;
ix. identify methods of energy transition;
x. explain the importance of energy in the development of the society;
xi. analyze the effect of energy use to the environment;
xii. identify the impact of energy on the environment;
xiii. identify energy sources that are friendly or hazardous to the environment;
xiv. identify energy uses in their immediate environment;
xv. suggests ways of safe energy use
xvi. state different forms of energy conversion.
xvii. Photovoltaic cells
xviii. Work function (φ= hf)
xix. Planck’s constant
8. Simple Machines
(i) definition of simple machines;
(ii) types of machines;
(iii) mechanical advantage, velocity ratio and efficiency of machines.
Candidates should be able to:
i. identify different types of simple machines;
ii. solve problems involving simple machines.
9. Elasticity: Hooke’s law and Young’s modulus;
(i) elastic limit, yield point, breaking point,
(ii) the spring balance as a device for measuring force;
(iii.) work done per unit volume in springs and elastic strings;
Candidates should be able to:
i. interpret force-extension curves;
ii. interpret Hooke’s law and Young’s modulus of a material; iii use spring balance to measure force;
iv. determine the work done in spring and elastic strings.
10. Pressure
(a) Atmospheric Pressure
(i) definition of atmospheric pressure;
(ii) units of pressure (S.I) units (Pa);
(iii) measurement of pressure;
(iv) simple mercury barometer; aneroid barometer and manometer;
(v) variation of pressure with height;
(vi) the use of barometer as an altimeter.
(b) Pressure in liquids
(i) the relationship between pressure, depth and density (P = ρgh)
(ii) transmission of pressure in liquids (Pascal’s Principle)
(iii) application
Candidates should be able to:
i. recognize the S.I units of pressure (Pa);
ii. identify pressure measuring instruments;
iii. relate the variation of pressure to height;
iv. use a barometer as an altimeter;
v. determine the relationship between pressure depth and density; vi apply the principle of transmission of pressure in liquids to solve problems;
vii. determine and apply the principle of pressure in liquid.
11. Liquids At Rest
(i) determination of density of solids and liquids
(ii) definition of relative density
(iii) upthrust on a body immersed in a liquid
(iv) Archimedes’ principle and law of floatation and applications, e.g., ships and hydrometers.
Candidates should be able to:
i. distinguish between density and relative density of substances;
ii. determine the upthrust on a body immersed in a liquid;
iii. apply Archimedes’ principle and law of floatation to solve problems.
12. Temperature and Its Measurement
(i) concept of temperature
(ii) thermometric properties
(iii) calibration of thermometers
(iv) temperature scales –Celsius and Kelvin.
(v) types of thermometers
(vi) conversion from one scale of temperature to another
Candidates should be able to:
i. identify thermometric properties of materials that are used for different thermometers;
ii. calibrate thermometers;
iii. differentiate between temperature scales e.g. Celsius, Fahrenheit and Kelvin;
iv. compare the types of thermometers;
vi. convert from one scale of temperature to another.
13. Quantity of Heat
(i) heat as a form of energy;
(ii) definition of heat capacity and specific heat capacity of solids and liquids;
(iv) determination of heat capacity and specific heat capacity of substances by simple methods e.g. method of mixtures and electrical method and Newton’s law of cooling.
Candidates should be able to:
i. differentiate between heat capacity and specific heat capacity;
ii. determine heat capacity and specific heat capacity using simple methods;
iii. solve numerical problems.
14. Change of State
(i) latent heat;
(ii) specific latent heats of fusion and vaporization;
(iii) melting, evaporation and boiling;
(iv) the influence of pressure and of dissolved substances on boiling and melting points;
(v) application in appliances.
Candidates should be able to:
i. differentiate between latent heat and specific latent heats of fusion and vaporization;
ii. differentiate between melting, evaporation and boiling;
iii. examine the effects of pressure and of dissolved substance on boiling and melting points.
iv. solve numerical problems.
15. Thermal Expansion
(a) Solids
(i) definition and determination of linear, volume and area expansivities;
(ii) effects and applications, e.g., expansion in building strips and railway lines;
(iii) relationship between different expansivities.
(b) Liquids
(i) volume expansivity;
(ii) real and apparent expansivities;
(iii) determination of volume expansivity;
(iv) anomalous expansion of water.
Candidates should be able to:
i. determine linear and volume expansivities;
ii. assess the effects and applications of thermal expansivities;
iii. determine the relationship between different expansivities;
iv. determine volume, apparent, and real expansivities of liquids;
v. analyse the anomalous expansion of water.
16. Gas Laws
(i) Boyle’s law (isothermal process)
(ii) Charle’s law (isobaric process)
(iii) Pressure law (volumetric process)
(iv) absolute zero of temperature
(v) general gas equation:
P V ( = constant) T
(vi) ideal gas equation
e.g., Pv = nRT
(iv) Van der waal gas
Candidates should be able to:
i. interpret the gas laws;
ii. use expression of these laws to solve numerical problems;
iii. interpret Van der waal equation for one mole of a real gas.
17. Vapours
(i) unsaturated and saturated vapours;
(ii) relationship between saturated vapour pressure (S.V.P) and boiling;
(iii) determination of S.V.P by barometer tube method;
(iv) formation of dew, mist, fog, cloud and rain;
(v) study of dew point, humidity and relative humidity;
(vi) hygrometry; estimation of the humidity of the atmosphere using wet and dry bulb hygrometers.
Candidates should be able to:
i. distinguish between saturated and unsaturated vapours;
ii. relate saturated vapour pressure to boiling point;
iii. determine S.V.P by barometer tube method;
iv. differentiate between dew point, humidity and relative humidity;
vi. estimate the humidity of the atmosphere using wet and dry bulb hygrometers;
vii. solve numerical problems.
18. Structure of Matter and Kinetic Theory
(a) Molecular nature of matter
(i) atoms and molecules;
(ii) molecular theory: explanation of Brownian motion, diffusion, surface tension, capillarity, adhesion, cohesion and angles of contact e.tc; law of definite proportion;
(iii) examples and applications.
(b) Kinetic Theory
(i) assumptions of the kinetic theory
(ii) using the theory to explain the pressure exerted by gas, Boyle’s law, Charles’ law, melting, boiling, vapourization, change in temperature, evaporation, etc.
Candidates should be able to:
i. differentiate between atoms and molecules;
ii. use molecular theory to explain Brownian motion, diffusion, surface, tension, capillarity, adhesion, cohesion and angle of contact;
iii. examine the assumptions of kinetic theory;
iv. interpret kinetic theory, the pressure exerted by gases, Boyle’s law, Charles’s law, melting, boiling, vaporization, change in temperature, evaporation, etc.
19. Heat Transfer
(i) conduction, convection and radiation as modes of heat transfer;
(ii) temperature gradient, thermal conductivity and heat flux;
(iii) effect of the nature of the surface on the energy radiated and absorbed by it;
(iv) the conductivities of common materials;
(v) the thermos flask/vacuum flask;
(vi) land and sea breeze;
(vii) combustion engines.
Candidates should be able to:
i. differentiate between conduction, convection and radiation as modes of heat transfer;
ii. solve problems on temperature gradient, thermal conductivity and heat flux;
iii. assess the effect of the nature of the surface on the energy radiated and absorbed by it;
iv. compare the conductivities of common materials;
v. relate the component part of the working of the thermos flask;
vi. differentiate between land and sea breeze;
vii. analyse the principles of operating internal combustion jet engines, rockets.
viii. understand the advantages and disadvantages of electric engine over combustion engine.
20. Waves
(a) Production and Propagation
(i) wave motion;
(ii) vibrating systems as source of waves;
(iii) waves as mode of energy transfer;
(iv) distinction between particle motion and wave motion;
(v) relationship between frequency, wavelength and wave velocity (V=f λ);
(vi) phase difference, wave number and wave vector;
(vii) progressive wave equation e.g. Y = A sin (2π/λ)(vt ± x)
(b) Classification
(i) types of waves; mechanical and electromagnetic waves;
(ii) longitudinal and transverse waves;
(iii) stationary and progressive waves;
(iv) examples of waves from springs, ropes, stretched strings and the ripple tank.
(c) Characteristics/Properties
(i) reflection, refraction, diffraction and plane polarization;
(ii) superposition of waves e.g., interference
(iii) Beats;
(iv) Doppler effects (qualitative treatment only).
Candidates should be able to:
i. interpret wave motion;
ii. identify vibrating systems as sources of waves; iii use waves as a mode of energy transfer; iv distinguish between particle motion and wave motion;
v. relate frequency and wave length to wave velocity;
vi. determine phase difference, wave number and wave vector;
vii. use the progressive wave equation to compute basic wave parameters;
viii. examples in wave equations;
ix. differentiate between mechanical and electromagnetic waves;
x. differentiate between longitudinal and transverse waves;
xi. distinguish between stationary and progressive waves;
xii. indicate the example of waves generated from springs, ropes, stretched strings and the ripple tank;
xiii. differentiate between reflection, refraction, diffraction and plane polarization of waves;
xiv. analyse the principle of superposition of waves;
xv. solve numerical problems on waves explain the phenomenon of beat, beat frequency and uses;
xvi. explain Doppler effect of sound and application
21. Propagation of Sound Waves
(i) the necessity for a material medium;
(ii) speed of sound in solids, liquids and air;
(iii) reflection of sound; echoes, reverberation and their applications;
(iv) advantages and disadvantages of echoes and reverberations.
Candidates should be able to:
i. determine the need for a material medium in the propagation of sound waves;
ii. compare the speed of sound in solids, liquids and air;
iii. relate the effects of temperature and pressure to the speed of sound in air;
iv. solve problem on echoes, reverberation and speed;
v. compare the disadvantages and advantages of echoes.
vi. solve problems on echo, reverberation and speed of sound.
22. Characteristics of Sound Waves
(i) noise and musical notes;
(ii) quality, pitch, intensity and loudness and their application to musical instruments;
(iii) simple treatment of harmonics and overtones produced by vibrating strings and their columns Fo = (1/2L)√(T/μ) (μ = m/ℓ)
(iv) acoustic examples of resonance;
(v) frequency of a note emitted by air columns in closed and open pipes in relation to their lengths.
Candidates should be able to:
i. differentiate between noise and musical notes;
ii. analyse quality, pitch, intensity and loudness of sound notes;
iii. evaluate the application of (ii) above in the construction of musical instruments;
iv. identify overtones by vibrating stings and air columns;
iv. itemize acoustical examples of resonance;
vi. determine the frequencies of notes emitted by air columns in open and closed pipes in relation to their lengths.
23. Light Energy
(a) Sources of Light
(i) natural and artificial sources of light;
(ii) luminous and non-luminous objects.
(b) Propagation of light
(i) speed, frequency and wavelength of light;
(ii) formation of shadows and eclipse;
(iii) the pin-hole camera.
Candidates should be able to:
i. compare the natural and artificial sources of light;
ii. differentiate between luminous and non luminous objects;
iii. relate the speed, frequency and wavelength of light;
iv. interpret the formation of shadows and eclipses;
v. solve problems using the principle of operation of a pin-hole camera.
24. Reflection of Light at Plane and Curved Surfaces
(i) laws of reflection;
(ii) application of reflection of light;
(iii) formation of images by plane, concave and convex mirrors and ray diagrams;
(iv) use of the mirror formula: 1 1 1 = + f u v
(v) linear and angular magnification.
Candidates should be able to:
i. interpret the laws of reflection;
ii. illustrate the formation of images by plane, concave and convex mirrors;
iii. apply the mirror formula to solve optical problems;
iv. determine the linear magnification;
v. apply the laws of reflection of light to the working of periscope, kaleidoscope and the sextant.
25. Refraction of Light Through at Plane and Curved Surfaces
(i) laws of refraction;
(ii) explanation of refraction in terms of velocity of light in the media;
(iii) definition of refractive index of a medium;
(iv) determination of refractive index of glass and liquid using Snell’s law;
(v) real and apparent depth and lateral displacement;
(vi) critical angle and total internal reflection.
(b) Glass Prism
(i) use of the minimum deviation formula: U = sin[(A + D)/2] / sin[A/2] (ii) type of lenses; triangular, rectangular etc.
(iii) use of lens formula: 1/f = 1/u + 1/v and Newton’s formular (F2 = ab)
(v) magnification.
Candidates should be able to:
i. interpret the laws of reflection;
ii. determine the refractive index of glass and liquid using Snell’s law;
iii. determination of focal length of curved surfaces
iv. determine the refractive index using the principle of real and apparent depth;
v. determine the conditions necessary for total internal reflection;
vi. examine the use of periscope, prism, binoculars, optical fibre;
vii. apply the principles of total internal reflection to the formation of mirage;
viii. use of lens formula and ray diagrams to solve optical numerical problems;
ix. determine the magnification of an image;
x. calculate the refractive index of a glass prism using minimum deviation formula;
xi. ray tracing through optical prism.
26. Optical Instruments
(i) general principles of microscopes, telescopes, projectors, cameras and the human eye (physiological details of the eye are not required);
(ii) power of a lens;
(iii) angular magnification;
(iv) near and far points;
(v) sight defects and their corrections.
27. (a) Dispersion of light and colours
(i) dispersion of white light by a triangular
Candidates should be able to:
i. apply the principles of operation of optical instruments to solve problems;
ii. distinguish between the human eye and the cameras;
iii. calculate the power of a lens;
iv. evaluate the angular magnification of optical instruments;
v. determine the near and far points;
vi. detect sight defects and their corrections.
Prism;
(ii) production of pure spectrum;
(iii) colour mixing by addition and subtraction;
(iv) colour of objects and colour filters;
(v) rainbow and formation.
(b)Electromagnetic spectrum
(i) description of sources and uses of various types of radiation.
Candidates should be able to:
i. identify primary colours and obtain secondary colours by mixing;
ii. understand the formation of rainbow;
iii. deduce why objects have colours;
iv. analyse colours using colour filters;
v. analyse the electromagnetic spectrum in relation to their wavelengths, sources, detection and uses;
vi. define monochromatic light.
28. Electrostatics
(i) existence of positive and negative charges in matter;
(ii) charging a body by friction, contact and induction;
(iii) electroscope;
(iv) Coulomb’s inverse square law, electric field and potential;
(v) electric field intensity, potential and potential difference;
(vi) electric discharge and lightning.
Candidates should be able to:
i. identify charges;
ii. examine uses of an electroscope;
iii. apply Coulomb’s square law of electrostatics to solve problems;
iv. deduce expressions for electric field intensity and potential difference;
v. identify electric field flux patterns of isolated and interacting charges;
vi. analyse the distribution of charges on a conductor and how it is used in lightening conductors’
vii. charge a body by friction, induction and contant.
29. Capacitors
(i) types and functions of capacitors;
(ii) parallel plate capacitors;
(iii) capacitance of a capacitor;
(iv) the relationship between capacitance, area separation of plates and medium between the plates EA C = d
(v) capacitors in series and parallel;
(vi) energy stored in a capacitor.
Candidates should be able to:
i. determine uses of capacitors;
ii. analyse parallel plate capacitors;
iii. determine the capacitance of a capacitor;
iv. analyse the factors that affect the capacitance of a capacitor;
v. solve problems involving the arrangement of a capacitor;
vi. determine the energy stored in capacitors.
30. Electric Cells
(i) simple voltaic cell and its defects;
(ii) Daniel cell, Leclanche cell (wet and dry);
(iii) lead –acid accumulator and Nickel-Iron (Nife) Lithium lon and Mercury cadmium;
(iv) maintenance of cells and batteries (detail treatment of the chemistry of a cell is not required);
(vi) arrangement of cells;
(vii) efficiency of a cell.
Candidates should be able to:
i. identify the defects of the simple voltaic cell and their correction;
ii. compare different types of cells including solar cell;
iii. compare the advantages of lead-acid and Nikel iron accumulator;
iv. solve problems involving series and parallel combination of cells.
31. Current Electricity
(i) electromagnetic force (emf), potential difference (p.d.), current, internal resistance of a cell and lost Volt;
(ii) Ohm’s law, resistivity and conductivity;
(iii) measurement of resistance;
(iv) meter bridge;
(v) resistance in series and in parallel and their combination;
(vi) the potentiometer method of measuring emf, current and internal resistance of a cell.
(vii) electrical networks.
Candidates should be able to:
i. differentiate between emf, p.d., current and internal resistant of a cell;
ii. apply Ohm’s law to solve problems;
iii. use metre bridge to calculate resistance;
iv. compute effective total resistance of both parallel and series arrangement of resistors;
v. determine the resistivity and the conductivity of a conductor;
vi. measure emf. current and internal resistance of a cell using the potentiometer;
vii. identify the advantages of the potentiometer;
viii. apply Kirchoff’s law in electrical networks.
32. Electrical Energy and Power
(i) concepts of electrical energy and power;
(ii) commercial unit of electric energy and power;
(iii) electric power transmission
(v) heating effects of electric current;
(vi) electrical wiring of houses;
(vii) use of fuses.
Candidates should be able to:
i. apply the expressions of electrical energy and power to solve problems;
ii. analyse how power is transmitted from the power station to the consumer;
iii. identify the heating effects of current and its uses;
iv. identify the advantages of parallel arrangement over series;
v. determine the fuse rating.
33. Magnets and Magnetic Fields
(i) natural and artificial magnets;
(ii) magnetic properties of soft iron and steel;
(iii) methods of making magnets and demagnetization;
(iv) concept of magnetic field;
(v) magnetic field of a permanent magnet;
(vi) magnetic field round a straight current carrying conductor, circular wire and solenoid;
(vii) properties of the earth’s magnetic field; north and south poles, magnetic meridian and angle of dip and declination;
(viii) flux and flux density;
(ix) variation of magnetic field intensity over the earth’s surface
(x) applications: earth’s magnetic field in navigation and mineral exploration.
Candidates should be able to:
i. give examples of natural and artificial magnets;
ii. differentiate between the magnetic properties of soft iron and steel;
iii. identify the various methods of making magnets and demagnetizing magnets;
iv. describe how to keep a magnet from losing its magnetism;
v. determine the flux pattern of an isolated magnet;
vi. determine the flux pattern exhibited when two magnets are placed together pole to pole;
vii. determine the flux of a current carrying conductor, circular wire and solenoid including the polarity of the solenoid;
viii. determine the flux pattern of a magnet placed in the earth’s magnetic fields;
ix. identify the magnetic elements of the earth’s flux;
x. determine the variation of earth’s magnetic field on the earth’s surface;
xi. examine the applications of the earth’s magnetic field.
34. Force on a Current-Carrying Conductor in a Magnetic Field
(i) quantitative treatment of force between two parallel current-carrying conductors;
(ii) force on a charge moving in a magnetic field;
(iii) the d. c. motor;
(iv) electromagnets;
(v) carbon microphone;
(vi) moving coil and moving iron instruments;
(viii) conversion of galvanometers to ammeters and voltmeter using shunts and multipliers;
(ix) sensitivity of a galvanometer.
Candidates should be able to:
i. determine the direction of force on a current carrying conductor using Fleming’s left-hand rule;
ii. interpret the attractive and repulsive forces between two parallel current-carrying conductors using diagrams;
iii. determine the relationship between the force, magnetic field strength, velocity and the angle through which the charge enters the field;
iv. interpret the working of the d. c. motor;
v. analyse the principle of electromagnets and give examples of its application;
vi. compare moving iron and moving coil instruments;
vii. convert a galvanometer into an ammeter or a voltmeter;
viii. identify the factors affecting the sensitivity of a galvanometer.
35. (a) Electromagnetic Induction
(i) Faraday’s laws of electromagnetic induction;
(ii) Lenz’s law as an illustration of the principle of conservation of energy;
(iii) factors affecting induced emf;
(iv) a.c. and d.c generators;
(v) transformers;
(vi) the induction coil.
(b) Inductance
(i) explanation of inductance;
(ii) unit of inductance;
(iii) energy stored in an inductor:
E=½ I2L
(iv) application/uses of inductors.
(c) Eddy Current
(i) reduction of eddy current
(ii) applications of eddy current
(iii) effects of eddy current
Candidates should be able to:
i. interpret the laws of electromagnetic induction;
ii. identify factors affecting induced emf;
iii. recognize how Lenz’s law illustrates the principle of conservation of energy;
iv. interpret the diagrammatic set up of A.
C. generators;
v. identify the types of transformer;
vi. examine principles of operation of transformers;
vii. assess the functions of an induction coil;
viii. draw some conclusions from the principles of operation of an induction coil;
ix. interpret the inductance of an inductor;
x. recognize units of inductance;
xi. calculate the effective total inductance in series and parallel arrangement;
xii. deduce the expression for the energy stored in an inductor;
xiii. examine the applications of inductors;
xiv. describe the method by which eddy current losses can be reduced;
xv. determine ways by which eddy currents can be used.
36. Simple A. C. Circuits
(i) explanation of a.c. current and voltage;
(ii) peak and r.m.s. values;
(iii) a.c. source connected to a resistor;
(iv) a.c source connected to a capacitor-capacitive reactance;
(v) a.c source connected to an inductor inductive reactance;
(vi) R-L-C circuits;
(vii) vector diagram, phase angle and power factor;
(viii) resistance and impedance;
(ix) effective voltage in an R-L-C circuits;
(x) resonance and resonance frequency: F0 = 1/(2π√LC)
Candidates should be able to:
i. identify a.c. current and d.c. voltage;
ii. differentiate between the peak and r.m.s. values of a.c.;
iii. determine the phase difference between current and voltage;
iv. interpret R-L-C circuits;
v. analyse vector diagrams;
vi. calculate the effective voltage, reactance and impedance;
vii. recognize the condition by which the circuit is at resonance;
viii. determine the resonant frequency of R-L-C arrangement;
ix. determine the instantaneous power, average power and the power factor in
a. c. circuits.
37. Conduction of Electricity Through
(a) liquids
(i) electrolytes and non-electrolyte;
(ii) concept of electrolysis;
(iii) Faraday’s laws of electrolysis;
(iv) application of electrolysis, e.g., electroplating, calibration of ammeter etc.
(b) gases
(i) discharge through gases (qualitative treatment only);
(ii) application of conduction of electricity through gases;
Candidates should be able to:
i. distinguish between electrolytes and non-electrolytes;
ii. analyse the processes of electrolysis;
iii. apply Faraday’s laws of electrolysis to solve problems;
iv. analyse discharge through gases;
v. determine some applications/uses of conduction of electricity through gases.
38. Elementary Modern Physics
(i) Bohr’s theory, Rutherford’s theory and radioactivity;
(ii) models of the atom and their limitations;
(iii) elementary structure of the atom;
(iv) energy levels and spectra;
(v) thermionic and photoelectric emissions;
(vi) Einstein’s equation and stopping potential
(vii) applications of thermionic emissions and photoelectric effects;
(viii) simple method of production of x-rays;
(ix) properties and applications of alpha, beta and gamma rays;
(x) half-life and decay constant;
(xi) simple ideas of production of energy by fusion and fission;
(xii) binding energy, mass defect and Einstein’s Energy equation [∆E = ∆Mc2] (xiii) wave-particle (duality of matter);
(xiv) electron diffraction;
(xv) the uncertainty principle.
Candidates should be able to:
i. identify the models of the atom and write their limitations;
ii. describe elementary structure of the atom;
iii. differentiate between the energy levels and spectra of atoms;
iv. compare thermionic emission and photoelectric emission;
v. apply Einstein’s equation to solve problems of photoelectric effect;
vi. calculate the stopping potential;
vii. relate some application of thermionic emission and photoelectric effects;
viii. interpret the process involved in the production of x-rays; ix dentify some properties and applications of x-rays;
x. analyse elementary radioactivity;
xi. distinguish between stable and unstable nuclei;
xii. identify isotopes of an element;
xiii. compare the properties of alpha, beta and gamma rays;
xiv. relate half-life and decay constant of a radioactive element;
xv. determine the binding energy, mass defect and Einstein’s energy equation;
xvi. analyse wave particle duality;
xvii. solve some numerical problems based on the uncertainty principle and wave – particle duality.
39. Introductory Electronics
(i) distinction between metals, semiconductors and insulators (elementary knowledge of band gap is required);
(ii) intrinsic and extrinsic semiconductors (n-type and p-type semiconductors);
(iii) uses of semiconductors and diodes in rectification and transistors in amplification;
(iv) elementary knowledge of diodes and transistors.
Candidates should be able to:
i. differentiate between conductors, semi-conductors and insulators;
ii. distinguish between intrinsic and extrinsic semiconductors;
iii. distinguish between electron and hole carriers;
iv. analyse diodes and transistor
vi. relate diodes to rectification and transistor to amplification.
40. Introduction to fibre optics and lasers
(a) fibre optics
(b) Lasers
Candidates should be able to;
(i) explain the concept of fibre optics;
(ii) understand the principle of transmission of light through an optical fibre;
(iii) apply the principle of fibre optics in Local Area Network (LAN), medicine, laser beam etc;
Candidates should be able to;
(i) understand the meaning of laser;
(ii) understand the various types of lasers (solid state, gas, liquid and semiconductor lasers);
(iii) apply the knowledge of lasers in scientific research, communication, medicine, military technology, holograms etc;
(iv) identify the dangers involved in using lasers.

RECOMMENDED TEXTS

Ike, E.E. (2014). Essential Principles of Physics, Jos ENIC Publishers.

Ike, E.E. (2014). Numerical Problems and Solutions in Physics, Jos: ENIC Publishers.

Nelkon, M. (1977). Fundamentals of Physics, Great Britain: Hart Davis Education.

Nelkon, M. and Parker … (1989). Advanced Level Physics, (Sixth Edition): Heinemann.

Okeke, P.N. and Anyakoha, M.W. (2000). Senior Secondary School Physics, Lagos: Pacific Printers.

Olumuyiwa, A. and Ogunkoya, O. O. (1992). Comprehensive Certificate Physics, Ibadan: University Press Plc.

Orokpo, J.A. (2025). Ultimate UTME Preparatory Series Physics. Peridot Publishers and Printing Services Limited, Nasarawa State, Nigeria

Block-by-block breakdown with worked examples

Block 1: Mechanics (topics 1–11)

Mechanics is the foundation of the paper. The syllabus covers units and measuring instruments, vectors, motion (including circular motion and simple harmonic motion), gravitation, equilibrium, friction, work and energy, machines, elasticity and pressure.

  • Units and dimensions: topic 1 asks you to combine fundamental quantities and determine their units. Know how to find the units of force, pressure, work and power from base units.
  • Equations of motion: v = u + at, s = ut + ½at², v² = u² + 2as. Know how to read velocity–time graphs: the gradient gives acceleration, the area gives distance.
  • Projectiles and circular motion: centripetal force F = mv²/r appears regularly.
  • Newton’s laws and momentum: impulse = change in momentum; momentum is conserved in collisions.
  • Machines: efficiency = (MA ÷ VR) × 100%.
  • Elasticity: Hooke’s law (F = ke) and Young’s modulus.
  • Pressure in liquids: P = ρgh, Pascal’s principle and Archimedes’ principle.

Worked example (motion): A car starts from rest and accelerates uniformly at 2 m/s² for 5 s. How far does it travel? s = ut + ½at² = 0 + ½ × 2 × 25 = 25 m.

Worked example (machines): A machine has a velocity ratio of 5 and an efficiency of 80%. What is its mechanical advantage? MA = efficiency × VR = 0.8 × 5 = 4.

Worked example (pressure): Find the pressure at a depth of 10 m in water (density 1000 kg/m³, g = 10 m/s²), ignoring atmospheric pressure. P = ρgh = 1000 × 10 × 10 = 100,000 Pa (1.0 × 10⁵ Pa).

Block 2: Heat and properties of matter (topics 12–19)

This block mixes definitions with straightforward calculations. Thermometers, specific heat capacity, latent heat, expansion, the gas laws, vapour pressure, kinetic theory and heat transfer all appear.

  • Heat calculations: Q = mcθ for temperature change and Q = mL for change of state.
  • Gas laws: Boyle’s, Charles’s and the pressure law, combined as PV/T = constant. Always convert to kelvin.
  • Expansion: linear, area and cubic expansivity, and why water behaves anomalously between 0 °C and 4 °C.
  • Vapours: saturated vapour pressure and its link to boiling point; relative humidity and dew point.
  • Heat transfer: conduction, convection and radiation, including the vacuum flask.

Worked example (heat): How much heat is needed to raise the temperature of 2 kg of water from 20 °C to 70 °C? (c = 4200 J/kg K.) Q = mcθ = 2 × 4200 × 50 = 420,000 J.

Worked example (gas law): A gas occupies 300 cm³ at 27 °C. At constant pressure, what’s its volume at 127 °C? Convert to kelvin: 300 K and 400 K. V₂ = V₁ × T₂/T₁ = 300 × 400/300 = 400 cm³.

Block 3: Waves, sound and light (topics 20–27)

Waves and optics carry several formula-based questions and many diagram questions.

  • Wave equation: v = fλ. The syllabus also lists the progressive wave equation.
  • Sound: echoes, resonance, beats and the frequencies of notes from strings and air columns in open and closed pipes.
  • Reflection: plane and curved mirrors, the mirror formula and magnification.
  • Refraction: Snell’s law, refractive index, real and apparent depth, critical angle and total internal reflection.
  • Lenses and instruments: the lens formula 1/f = 1/u + 1/v, the camera, the eye and its defects, the microscope and telescope.
  • Dispersion: the spectrum of white light and the colour of objects.

Worked example (wave equation): A sound wave of frequency 500 Hz travels at 340 m/s. Find its wavelength. λ = v/f = 340/500 = 0.68 m.

Worked example (refraction): A tank contains water of refractive index 4/3 to a real depth of 12 cm. What’s the apparent depth? Apparent depth = real depth ÷ n = 12 ÷ (4/3) = 9 cm.

Worked example (lens): An object is 30 cm from a converging lens of focal length 10 cm. Find the image distance. 1/v = 1/f − 1/u = 1/10 − 1/30 = 2/30, so v = 15 cm (real image).

Block 4: Electricity and magnetism (topics 28–37)

This is the second large block. It starts with static electricity and capacitors, moves through cells and circuits, and ends with magnetism, induction, a.c. circuits and conduction in liquids and gases.

  • Circuits: Ohm’s law, resistors in series and parallel, e.m.f. and internal resistance (E = I(R + r)).
  • Power and energy: P = IV = I²R = V²/R, and electrical energy in kWh for cost calculations.
  • Capacitors: Q = CV, capacitors in series and parallel, and the energy stored.
  • Magnetism and induction: force on a conductor, Faraday’s and Lenz’s laws, transformers and generators.
  • a.c. circuits: peak and r.m.s. values, reactance, impedance and resonance frequency.
  • Electrolysis: Faraday’s laws of electrolysis.

Worked example (internal resistance): A cell of e.m.f. 3 V and internal resistance 1 Ω is connected to a 5 Ω resistor. Find the current. I = E/(R + r) = 3/6 = 0.5 A.

Worked example (energy cost): A 2 kW heater runs for 3 hours. If electricity costs ₦100 per kWh, what’s the cost? Energy = 2 kW × 3 h = 6 kWh. Cost = 6 × ₦100 = ₦600. (The tariff here is just for the example.)

Worked example (transformer): A transformer steps 240 V down to 12 V. If the primary coil has 1000 turns, how many turns has the secondary? Ns = Np × Vs/Vp = 1000 × 12/240 = 50 turns.

Block 5: Modern physics and electronics (topics 38–40)

These three topics are short but appear every year, and many candidates neglect them.

  • Modern physics: models of the atom and their limitations, energy levels and spectra, thermionic and photoelectric emission (Einstein’s equation and stopping potential), X-rays, alpha, beta and gamma rays, half-life and decay constant, fission and fusion, binding energy and mass defect (∆E = ∆Mc²), wave–particle duality, electron diffraction and the uncertainty principle.
  • Electronics: conductors, semiconductors and insulators, p-n junctions, diodes and their use in rectification, and transistors.
  • Fibre optics and lasers: the meaning and uses of lasers and optical fibres (communication, medicine, local area networks).

Worked example (half-life): A radioactive sample has a half-life of 4 days. What fraction remains after 12 days? 12 days is 3 half-lives, so (½)³ = 1/8 remains.

Key formulas the syllabus expects you to use

The Physics syllabus names many relationships explicitly. Learn these until you can recall them instantly:

Topic Relationship
Motion v = u + at; s = ut + ½at²; v² = u² + 2as
Circular motion F = mv²/r
Work and power W = Fs; P = W/t
Machines Efficiency = (MA/VR) × 100%
Liquids P = ρgh
Heat Q = mcθ; Q = mL
Gases P₁V₁/T₁ = P₂V₂/T₂
Waves v = fλ
Lenses 1/f = 1/u + 1/v; magnification = v/u
Prism Minimum deviation formula (as written in the syllabus)
Circuits V = IR; E = I(R + r); P = IV
Capacitors Q = CV; energy = ½CV²
a.c. resonance F₀ = 1/(2π√LC)
Photoelectric effect φ = hf (work function)

A 12-week study plan built on the syllabus

Week Topics (JAMB numbers) Checkpoint
1 1–3: units, vectors, motion Solve motion graphs and equations of motion confidently
2 4–7: gravitation, equilibrium, friction, work/energy/power Moments, friction and energy problems
3 8–11: machines, elasticity, pressure, liquids at rest MA, VR, efficiency; Hooke’s law; Archimedes’ principle
4 12–15: temperature, heat, change of state, expansion Q = mcθ and Q = mL problems
5 16–19: gas laws, vapours, kinetic theory, heat transfer Gas law calculations in kelvin
6 20–22: waves and sound Wave equation, resonance, pipes and strings
7 23–27: light, reflection, refraction, instruments, dispersion Mirror and lens formulas; critical angle
8 28–32: electrostatics, capacitors, cells, current electricity, power Series/parallel circuits; internal resistance; kWh cost
9 33–37: magnetism, induction, a.c., conduction through liquids and gases Transformers; r.m.s. values; Faraday’s laws
10 38–40: modern physics, electronics, fibre optics and lasers Half-life; photoelectric effect; diodes
11 Mixed past questions across all blocks Two timed sets of 40 questions
12 Full CBT mock exams and error review Map every error to its syllabus objective

For topic priorities, see our guide to topics to read for JAMB Physics. For a timetable covering all your subjects, our JAMB reading timetable for science students shows how to balance Physics with Chemistry, Biology or Mathematics.

Recommended textbooks and how to use them

JAMB’s list of recommended texts appears at the end of the syllabus. Choose one comprehensive senior secondary Physics textbook to learn each topic properly, and one book of worked numerical problems to build speed. Use the syllabus to decide what to study in each book; skip chapters that go beyond the listed contents.

Common mistakes candidates make in JAMB Physics

  1. Mixing units. Convert cm to m, g to kg, °C to K and minutes to seconds before calculating.
  2. Ignoring the last three topics. Modern physics, electronics and lasers are short, factual and often easy marks.
  3. Memorising formulas without meaning. Many questions test which quantity changes when another changes, not just plugging in numbers.
  4. Forgetting sign conventions in mirror and lens problems. Use one convention consistently.
  5. Skipping graph practice. Velocity–time graphs, heating curves and I–V graphs are common.
  6. Not practising on a computer. Get used to reading diagrams on screen in a timed setting. Our JAMB CBT practice guide can help.

Who needs Physics in JAMB?

Physics is usually required for engineering, physical sciences, many technology courses and some health science courses, while other courses accept it as an option. Requirements vary by institution, so check your course in the JAMB brochure. Our guide to JAMB subject combinations explains how.

Is this the latest JAMB Physics syllabus?

This page reproduces JAMB’s official Physics syllabus file. JAMB updates syllabuses only occasionally and announces changes on its official platforms. Before your exam, confirm the current version on jamb.gov.ng or JAMB’s e-brochure on ibass.jamb.gov.ng. For 2027, JAMB has proposed holding the UTME between 15 and 25 March, subject to official confirmation.

Free: JambSmartPrep UTME Readiness Hub

Test yourself on these Physics topics with free UTME-style practice questions. Every answer comes with an explanation and a link back to the right part of the syllabus.

Practise Physics questions →

Frequently asked questions about the JAMB Physics syllabus

How many topics are in the JAMB Physics syllabus?

Forty numbered topics, from Measurements and Units (topic 1) to Introduction to Fibre Optics and Lasers (topic 40).

How many questions are in UTME Physics?

Physics, like the other non-English subjects, is widely set at 40 questions. Use of English has 60.

Are fibre optics and lasers in the JAMB Physics syllabus?

Yes. Topic 40 covers fibre optics and lasers, including the meaning of a laser and its uses in areas such as communication, local area networks and medicine.

Which Physics topics are the most important?

Every topic can be examined, but mechanics and electricity are the largest blocks. Our guide to topics to read for JAMB Physics discusses priorities in detail.

Do I need to memorise formulas for JAMB Physics?

Yes. The UTME doesn’t give you a formula sheet in the way some exams do, so learn the key relationships listed above and practise using them.

Is calculus needed in JAMB Physics?

No. The Physics syllabus relies on algebra, graphs and simple trigonometry. Calculus belongs to the Mathematics syllabus.

Is the JAMB Physics syllabus the same as WAEC’s?

The content overlaps because both follow the SSS curriculum, but the documents differ, and WAEC includes a practical paper. Use the JAMB syllabus for the UTME.

Can I pass JAMB Physics without a Physics teacher?

Many candidates do, by studying topic by topic from a good textbook, practising past questions and checking every topic against the syllabus objectives. Worked examples like the ones above are the fastest way to learn the methods.

Where can I get the official JAMB Physics syllabus?

From JAMB’s official website and its e-brochure on the IBASS portal. This page reproduces the official text in full.

Related guides: Topics to read for JAMB Physics · JAMB areas of concentration · How many questions JAMB sets · How to use the JAMB syllabus