The JAMB syllabus for Chemistry is the official document that defines all 18 topics the UTME Chemistry paper can test, from separation of mixtures to the newer topic of astronomical chemistry. If a concept isn’t in it, JAMB doesn’t expect you to know it. If it is, you need to know it to the depth the “Objectives” column describes.

Below you’ll find the full official syllabus, reproduced exactly as JAMB published it, in the same order and layout. Around it we’ve added a topic map, the calculations each topic expects, worked examples, a 10-week study plan, the mistakes that cost candidates marks and answers to the most common questions.

Quick answer: JAMB Chemistry syllabus

  • Topics: 18, numbered 1 (Separation of Mixtures and Purification of Chemical Substances) to 18 (Astronomical Chemistry).
  • Biggest topics: Non-metals and their compounds, metals and their compounds, and organic compounds, which together contain more than 100 objectives.
  • Calculation topics: the mole concept, gas laws, solubility, electrolysis, energy changes, rates and half-life.
  • Exam format: computer-based multiple choice. Use of English has 60 questions; Chemistry and your other subjects are widely set at 40 each.
  • Official source: JAMB publishes syllabuses on its own platforms, including jamb.gov.ng.

In this guide:

JAMB Chemistry syllabus at a glance

JAMB lists 18 topics in one sequence. We’ve grouped them into four study blocks so you can plan your revision. The numbers and names are JAMB’s.

Study block Syllabus topics
Foundations of matter 1 Separation of mixtures and purification; 2 Chemical combination (laws, formulae, equations, the mole concept, stoichiometry); 3 Kinetic theory of matter and gas laws; 4 Atomic structure and bonding; 5 Nuclear chemistry
Solutions and reactions 6 Solubility; 7 Environmental pollution; 8 Acids, bases and salts; 9 Oxidation and reduction (redox); 10 Electrolysis
Physical chemistry 11 Energy changes; 12 Rates of chemical reaction; 13 Chemical equilibria
Descriptive, organic and applied chemistry 14 Non-metals and their compounds; 15 Metals and their compounds; 16 Organic compounds; 17 Chemistry and industry; 18 Astronomical chemistry

Topics 14, 15 and 16 are long. Organic compounds alone has more than 40 listed objectives, from naming compounds to testing for proteins. Plan to spend about a third of your Chemistry time on these three topics.

What JAMB expects from you

The syllabus states four course objectives:

  • “Understand the basic principles and concepts in chemistry.” Definitions, laws and theories, such as the laws of chemical combination, Avogadro’s law and Le Chatelier’s principle.
  • “Interpret scientific data relating to chemistry.” Solubility curves, heating and cooling curves, energy profile diagrams, rate graphs and tables of experimental results.
  • “Deduce the relationships between chemistry and other sciences.” Overlaps with physics (radioactivity, gas laws) and biology (proteins, carbohydrates, enzymes).
  • “Apply the knowledge of chemistry to industry and everyday life.” Petroleum refining, soap and margarine, cement, fertilisers, water treatment, pollution and local fermentation.

The official JAMB Chemistry syllabus (full text)

Below is the complete JAMB UTME syllabus for Chemistry, reproduced word for word from JAMB’s official syllabus document. It keeps the original structure: general objectives, the detailed syllabus in two columns (Topics/Contents/Notes and Objectives) and the recommended texts. Chemical formulas keep their subscripts and charges as printed.

CHEMISTRY

GENERAL OBJECTIVES

The aim of the Unified Tertiary Matriculation Examination (UTME) syllabus in Chemistry is to prepare the candidates for the Board’s examination. It is designed to test their comprehension of the course objectives, which are to:

(i) understand the basic principles and concepts in chemistry;

(ii) interpret scientific data relating to chemistry;

(iii) deduce the relationships between chemistry and other sciences; and

(iv) apply the knowledge of chemistry to industry and everyday life.

DETAILED SYLLABUS

TOPICS/CONTENTS/NOTES OBJECTIVES
1. Separation of Mixtures and Purification of Chemical Substances
(a) Elements, compounds and mixtures
(b) Chemical and physical changes
(c) Pure and impure substances
(d) Boiling ,density, freezing and melting points
(e) Separation processes:
Evaporation, simple and fractional distillation, sublimation, re-crystallization, paper and column chromatography, simple and fractional crystallization, magnetization, decantation, filtration and centrifugation
Candidates should be able to:
(i) distinguish between elements, compounds and mixture;
(ii) differentiate between chemical and physical changes;
(iii) distinguish between pure and impure substances;
(iv) use boiling and melting points as criteria for purity of chemical substances;
(v) identify the properties of the components of a mixture;
(vi) specify the principle involved in each separation method; and
(vii) apply the basic principle of separation processes in everyday life.
2. Chemical Combination Laws of definite, multiple and reciprocal proportions, law of conservation of matter, chemical symbols, formulae, equations and their uses, relative atomic mass based on 12C=12, the mole concept and stoichiometry of reactions Candidates should be able to:
(i) deduce the chemical laws from given expressions/statements/data;
(ii) perform simple calculations involving formulae, equations/chemical composition and the mole concept; and
(iii) deduce the stoichiometry of chemical reactions.
3. Kinetic Theory of Matter and Gas Laws
(a) Phenomena to support the kinetic theory of matter using;
(i) melting
(ii) vapourization
(iii) boiling
(iv) freezing
(v) condensation in terms of molecular motion and Brownian movement
(b)(i) The laws of Boyle, Charles, Avogadro, Gay-Lussac, Graham and Dalton (law of partial pressure), molar volume and atomicity of gases
(ii) The ideal gas equation (PV = nRT)
(iii) The relationship between vapour density of gases and the relative molecular mass
(iv) Ideal and real gases
Candidates should be able to:
(i) apply the theory to distinguish between solids, liquids and gases;
(ii) deduce reasons for change of state;
(iii) draw inferences based on molecular motion;
(iv) deduce gas laws from given expressions/ statements;
(v) interpret graphical representations related to these laws;
(vi) perform simple calculations based on these laws, equations and relationships; and
(vii) state factors responsible for the deviation of real gases from ideal situation.
4. Atomic Structure and Bonding
(a) (i)The concept of atoms, molecules and ions, the works of Dalton ,Millikan, Rutherford, Moseley, Thompson and Bohr
(ii) Atomic structure, the four quantum numbers, the principles that govern the arrangement of atoms into orbitals, electron configuration, atomic number, mass number and isotopes; specific examples should be drawn from elements of atomic number 1 to 20
(iii) Shapes of s and p orbitals
(b) The periodic table and periodicity of elements, presentation of the periodic table with a view to recognizing families of elements e.g. alkali and alkaline-earth metals, halogens, the noble gases and transition metals. The variation of the following properties: ionization energy, ionic radii, electron affinity, electronegativity, electrical and thermal conductivities
(c) Chemical bonding Electrovalency and covalency, the electron configuration of elements and their tendency to attain the noble gas structure. Hydrogen bonding and metallic bonding as special types of electrovalency and covalency respectively; coordinate bond as a type of covalent bond as illustrated by complexes like [Fe(CN)6]3-, [Fe(CN)6]4-, [Cu(NH3)4]2+ and [Ag(NH3)2]+; van der Waals’ forces should be mentioned as a special type of bonding forces
(d) Shapes of simple molecules: linear ((H2, O2, C12, HCl and CO2), non-linear (H2O) and tetrahedral; (CH4) and pyramidal (NH3)
Candidates should be able to:
(i) distinguish between atoms, molecules and ions;
(ii) identify the contributions of these scientists to the development of the atomic structure;
(iii) deduce the number of protons, neutrons and electrons from atomic and mass numbers of an atom;
(iv) apply the rules guiding the arrangement of electrons in an atom;
(v) identify common elements exhibiting isotopy;
(vi) relate isotopy to mass number;
(vii) perform simple calculations relating to isotopy;
(viii) differentiate between the shapes of the orbitals;
(ix) determine the number of electrons in s and p atomic orbitals;
(x) relate atomic number to the position of an element on the periodic table;
(xi) relate properties of groups of elements on the periodic table;
(xii) identify reasons for variation in properties across the period and down the groups;
(xiii) differentiate between the different types of bonding;
(xiv) deduce bond types based on electron configurations;
(xv) relate the nature of bonding to properties of compounds; and
(xvi) differentiate between the various shapes of molecules.
5. Nuclear Chemistry
(i) Radioactivity – Types, properties and detection of radiations
(ii) Natural and artificial radioactivity
(iii) Nuclear stability and radioactive decay
(iv) Nuclear reactions: Nuclear fusion and fission
Candidates should be able to:
(i) distinguish between ordinary chemical reaction and nuclear reaction;
(ii) differentiate between natural and artificial radioactivity;
(iii) compare the properties of the different types of nuclear radiations;
(iv) compute simple calculations on the half-life of a radioactive material;
(v) balance simple nuclear equation; and
(vi) identify the various applications of radioactivity.
6. Solubility
(a) Unsaturated, saturated and supersaturated solutions. Solubility curves and simple deductions from them, (solubility defined in terms of mole per dm3) and simple calculations
(b) Solvents for fats, oil, perspiration and paints and the use of such solvents for the removal of stains
(c) True and false solutions (Suspensions and colloids):
Properties and examples Harmattan haze and water paints as examples of suspensions, fog, milk, blood, aerosol spray, emulsion paints and rubber solution as examples of colloids
Candidates should be able to:
(i) distinguish between the different types of solutions;
(ii) interpret solubility curves;
(iii) calculate the amount of solute that can dissolve in a given amount of solvent at a given temperature;
(iv) deduce that solubility is temperature-dependent;
(v) relate nature of solvents to their uses;
(vi) differentiate among true solutions, suspensions and colloids;
(vii) compare the properties of a ‘true’ solution and a ‘false’ solution; and
(viii) provide typical examples of suspensions and colloids.
7. Environmental Pollution
(a) Air
(i) The natural gaseous constituents and their proportion in the air
– nitrogen, oxygen, water vapour, carbon (IV) oxide and the noble gases (argon and neon)
(ii) Factors responsible for variation of components of air in the environment
(iii) Air as a mixture and some uses of the noble gases
(b)(i) Air pollution:
Examples of air pollutants such as H2S, CO, SO2, oxides of nitrogen, chlorofluorocarbons and dust
(ii) Sources and effects of pollutants
(c) Water pollution Sewage and oil pollution should be known
(d) Soil pollution:
Oil spillage, biodegradable and non-biodegradable pollutants
Candidates should be able to:
(i) give reason (s) for the existence of air as a mixture;
(ii) identify the principle involved in the separation of air components;
(iii) state reasons for the variation in the composition of air in the environment;
(iv) specify the uses of some of the constituents of air;
(v) identify the different types of pollution and pollutants;
(vi) specify different sources of pollutants;
(vii) classify pollutants as biodegradable and non-biodegradable;
(viii) specify the effects of pollution on the environment; and
(ix) identify measures for control of environmental pollution.
8. Acids, Bases and Salts
(a) General characteristics, properties and uses of acids, bases and salts.
Acids/base indicators, basicity of acids; normal, acidic, basic and double salts.
An acid defined as a substance whose aqueous solution furnishes H3O+ions or as a proton donor. Ethanoic, citric and tartaric acids as examples of naturally occurring organic acids, alums as examples of double salts, preparation of salts by neutralization, precipitation and action of acids on metals. Oxides and trioxocarbonate (IV) salts
(b) Qualitative comparison of the conductance of molar solutions of strong and weak acids and bases, relationship between conductance and amount of ions present
(c) pH and pOH scale;
Simple calculations, significance of pH value in everyday life, Buffer solution
(d) Acid/base titrations
(e) Hydrolysis of salts;
Simple examples such as NH4Cl, AlCl3, Na2CO3 and CH3COONa
Candidates should be able to:
(i) distinguish between the properties of acids and bases;
(ii) identify the different types of acids and bases;
(iii) determine the basicity of acids;
(iv) differentiate between acidity and alkalinity using acid/base indicators;
(v) identify the various methods of preparation of salts;
(vi) classify different types of salts;
(vii) relate degree of dissociation to strength of acids and bases;
(viii) relate degree of dissociation to conductance;
(ix) perform simple calculations on pH and pOH;
(x) enumerate the significance of pH in everyday life;
(xi) state applications of Buffer solution;
(xii) identify the appropriate acid-base indicator;
(xiii) interpret graphical representation of titration curves;
(xiv) perform simple calculations based on the mole concept;
(xv) balance equations for the hydrolysis of salts; and
(xvi) deduce the properties (acidic, basic, neutral) of the resultant solution.
9. Oxidation and Reduction – Redox
(a) Oxidation in terms of the addition of oxygen
(b) Reduction as removal of oxygen with the aid of hydrogen
(c) Oxidation and reduction in terms of electron transfer
(d) Use of oxidation numbers.
Oxidation and reduction treated as change in oxidation number and use of oxidation numbers in balancing simple equations
(e) IUPAC nomenclature of inorganic compounds using oxidation number
(f) Tests for oxidizing and reducing agents
Candidates should be able to:
(i) identify the various forms of expressing oxidation and reduction;
(ii) classify chemical reactions in terms of oxidation or reduction;
(iii) balance redox reaction equations;
(iv) deduce the oxidation number of chemical species;
(v) compute the number of electron transfer in redox reactions;
(vi) identify the name of redox species in a reaction;
(vii) distinguish between oxidizing and reducing agents in redox reactions;
(viii) apply oxidation number in naming inorganic compounds; and
(ix) relate reagents to their oxidizing and reducing abilities.
10. Electrolysis
(a) Electrolytes and non-electrolytes Faraday’s laws of electrolysis
(b) (i) Electrolysis of dilute H2SO4, aqueous CuSO4, CuC12 solution, dilute and concentrated NaC1 solutions and fused NaC1
(ii)Factors affecting discharge of ions at the electrodes
(c) Uses of electrolysis:
Purification of metals e.g. copper and production of elements and compounds (Al, Na, O2, Cl2 and NaOH)
(d) Electrochemical cells:
Electrochemical series (K, Ca ,Na, Mg,Al, Zn, Fe, Sn, Pb, H, Cu, Hg, Ag, Au) half-cell reactions and electrode potentials (Simple calculations only)
(e) Corrosion as an electrolytic process, cathodic protection of metals, painting, electroplating and coating with grease or oil as ways of preventing iron from corrosion
Candidates should be able to:
(i) distinguish between electrolytes and non-electrolytes;
(ii) perform calculations based on faraday as mole of electrons;
(iii) identify suitable electrodes for different electrolytes;
(iv) specify the chemical reactions at the electrodes;
(v) determine the products at the electrodes;
(vi) identify the factors that affect the products of electrolysis;
(vii) specify the different areas of application of electrolysis;
(viii) state the significance of electrochemical series;
(ix) identify the various electrochemical cells;
(x) calculate electrode potentials using half-cell reaction equations;
(xi) determine the different areas of application of electrolytic processes; and
(xii) identify methods used in protecting metals.
11. Energy Changes
(a) Energy changes (∆H) accompanying physical and chemical changes:
Dissolution of substances in/or reaction with water e.g. Na, NaOH, K, NH4Cl. Endothermic (+∆H) and exothermic (-∆H) reactions
(b) Entropy as an order-disorder phenomenon: simple illustrations like mixing of gases and dissolution of salts
(c) Spontaneity of reactions: ∆G0= 0 as a criterion for equilibrium, ∆G greater or less than zero as a criterion for non-spontaneity or spontaneity respectively
Candidates should be able to:
(i) determine the types of heat changes (∆H) in physical and chemical processes;
(ii) interpret graphical representations of heat changes;
(iii) relate the physical state of a substance to the degree of orderliness;
(iv) determine the conditions for spontaneity of a reaction ;
(v) relate ∆H0, ∆S0 and ∆G0 as the driving forces for chemical reactions; and
(vi) solve simple problems based on the relationships ∆G0= ∆H0 -T∆S0
12. Rates of Chemical Reaction
(a) Elementary treatment of the following factors which can change the rate of a chemical reaction;
(i) Temperature e.g. the reaction between HCl and Na2S2O3 or Mg and HCl
(ii) Concentration/ Pressure e.g. the reaction between HCl and Na2S2O3, HCl and marble and the iodine clock reaction. For gaseous systems, pressure may be used as concentration term
(iii) Surface area e.g. the reaction between marble and HCl with marble in:
(i) powdered form; and
(ii) lumps of the same mass.
(iv) Catalyst e.g. the decomposition of H2O2 or KClO3 in the presence or absence of MnO2
(b) Reaction rate curves
(c) Activation energy Qualitative treatment of Arrhenius’ law and the collision theory, effect of light on some reactions e.g. halogenation of alkanes
Candidates should be able to:
(i) identify the factors that affect the rates of a chemical reaction;
(ii) determine the effects of temperature on the rate of reactions;
(iii) examine the effect of concentration/ pressure on the rate of a chemical reaction;
(iv) describe how the rate of a chemical is affected by surface area;
(v) determine the types of catalysts suitable for different reactions and their effects;
(vi) determine ways of moderating these effects in chemical reactions;
(vii) interpret reaction rate curves;
(viii) solve simple problems on the rate of reactions;
(ix) relate the rate of reaction to the kinetic theory of matter;
(x) examine the significance of activation energy to chemical reactions; and
(xi) deduce the value of activation energy(Ea) from reaction rate curves.
13. Chemical Equilibra Reversible reactions and factors governing the equilibrium position.
Dynamic equilibrium.
Le Chatelier’s principle and its industrial applications, equilibrium constant.
Simple examples to include action of steam on iron and
N2O 4 2NO2
No calculation will be required
Candidates should be able to:
(i) identify the factors that affect the position of equilibrium of a chemical reaction;
(ii) predict the effects of each factor on the position of equilibrium;
(iii)specify the industrial processes where Le Chatelier’s principle is required; and
(iv) determine the effects of these factors on equilibrium constant.
14. Non-metals and their Compounds
(a) Hydrogen: commercial production from water gas and cracking of petroleum fractions, laboratory preparation, properties, uses and test for hydrogen
(b) Halogens: Chlorine as a representative element of the halogens.
Laboratory preparation, industrial preparation by electrolysis, properties and uses, e.g. water sterilization, bleaching, manufacture of HCl, plastics and insecticides Hydrogen chloride and Hydrochloric acid: Preparation and properties.
Chlorides and test for chlorides.
(c) Oxygen and Sulphur
(i) Oxygen:
Laboratory preparation, properties and uses. Commercial production from liquid air. Oxides: Acidic, basic, amphoteric and neutral, trioxygen (ozone) as an allotrope and the importance of ozone in the atmosphere Water – Water as a product of the combustion of hydrogen and its composition by volume.
Water as solvent, atmospheric gases dissolved in water and their biological significance.
Hard and soft water: Temporary and permanent hardness and methods of softening hard water.
Treatment of water for town supply.
Water of crystallization, efflorescence, deliquescence and hygroscopy.
Example of the substances exhibiting these properties and their uses
(ii) Sulphur:
Uses and allotropes: preparation of allotropes is not expected .
Preparation, properties and uses of sulphur(IV) oxide, the reaction of SO2 with alkalis. Trioxosulphate (IV) acid and its salts, the effect of acids on salts of trioxosulphate(IV), Tetraoxosulphate(VI) acid: Commercial preparation (contact process only), properties as a dilute acid, an oxidizing and a dehydrating agents and uses. Test for SO42–,SO32– ,SO2 Hydrogen sulphide: Preparation and properties as a weak acid, reducing and precipitating agents. Test for S2-, H2S
(d) Nitrogen:
(i) Laboratory preparation
(ii) Production from liquid air
(iii) Ammonia:
Laboratory and industrial preparations (Haber Process only), properties and uses, ammonium salts and their uses, oxidation of ammonia to nitrogen (IV) oxide and trioxonitrate (V) acid. Test for NH4+, NO2, NH3
(iv) Trioxonitrate (V) acid:
Laboratory preparation from ammonia; properties and uses. Trioxonitrate (V) salt-action of heat and uses. Test for NO3-, and other oxides of nitrogen
(v) Oxides of nitrogen: properties
(vi) The nitrogen cycle
(e) Carbon:
(i) Allotropes: Uses and properties
(ii) Carbon(IV) oxide, Laboratory preparation, Properties and uses. Action of heat on trioxocarbonate(IV) salts and test for
CO32–, HCO3–, CO2
(iii) Carbon(II) oxide:
Laboratory preparation, properties including its effect on blood, sources of carbon (II) oxide to include charcoal, fire and exhaust fumes
(iv) Coal: Different types, products obtained from destructive distillation of wood and coal
(v) Coke: Gasification and uses.
Manufacture of synthesis gas and uses
Candidates should be able to:
(i) predict reagents for the laboratory and industrial preparation of these gases and their compounds;
(ii) identify the properties of the gases and their compounds;
(iii) compare the properties of these gases and their compounds;
(iv) specify the uses of each gas and its compounds;
(v) determine the specific test for each gas and its compounds;
(vi) determine specific tests for Cl–,
(vii) predict the reagents for preparation, properties and uses of HCl(g ) and HCl(a q) ;
(viii) identify the allotropes of oxygen;
(ix) determine the significance of ozone to our environment;
(x) classify the oxides of oxygen and their properties;
(xi) identify the various uses of water;
(xii) identify the effects of dissolved atmospheric gases in water;
(xiii) distinguish between the properties of hard and soft water;
(xiv) determine the causes of hardness;
(xv) identify methods of removal of hardness;
(xvi) describe the processes involved in the treatment of water for town supply;
(xvii) distinguish between these phenomena;
(xviii) identify the various compounds that exhibit these phenomena;
(xix) identify the allotropes of sulphur and their uses;
(xx) predict the reagents for preparation, properties and uses of SO2and H2S;
(xxi) specify the preparations of H2SO4 and H2SO3, their properties and uses;
(xxii) determine specific tests for S2-, SO42– ,
H2S, SO2, SO3–
(xxiii) specify the laboratory and industrial preparation of NH3 ;
(xxiv) identify the properties and uses of NH3;
(xxv) determine specific test for NH4+ , NH3;
(xxvi) identify reagents for the laboratory preparation of HNO3, its properties and uses;
(xxvii) specify the properties of N2O, NO, NO2 gases;
(xxviii) determine the specific test for N2O , NO and NO3-;
(xxix) examine the relevance of nitrogen cycle to the environment;
(xxx) identify allotropes of carbon;
(xxxi) predict reagents for the laboratory preparation of CO2;
(xxxii) specify the properties of CO2 and its uses;
(xxxiii) determine the reagents for the laboratory preparation of CO;
(xxxiv) predict the effects of CO on human;
(xxxv) determine the specific tests for HCO3-,
CO32–, CO2 ;
(xxxvi) identify the different forms of coal;
(xxxvii) determine their uses; (xxxviii) specify the products of the destructive distillation of wood and coal; and
(xxxix) specify the uses of coke and synthesis gas.
15. Metals and their Compounds
(a) General properties of metals
(b) Alkali metals e.g. sodium
(i) Sodium hydroxide:- Production by electrolysis of brine, its action on aluminium, zinc and lead ions.
Uses including precipitation of metallic hydroxides
(ii) Sodium trioxocarbonate (IV) and sodium hydrogen trioxocarbonate (IV):
Production by Solvay process, properties and uses, e.g.
Na2CO3 in the manufacture of glass.
(iii) Sodium chloride: its occurrence in sea water and uses, the economic importance of sea water and the recovery of sodium chloride, test for Na+
(c) Alkaline-earth metals, e.g. calcium; calcium oxide, calcium hydroxide and calcium trioxocarbonate (IV);
Properties and uses. Preparation of calcium oxide from sea shells, the chemical composition of cement and the setting of mortar. Test for Ca2+
(d) Aluminium Purification of bauxite, electrolytic extraction, properties and uses of aluminium and its compounds. Test for A13+
(e) Tin Extraction from its ores Properties and uses
(f) Metals of the first transition series.
Characteristic properties:
(i) electron configuration
(ii) oxidation states
(iii) complex ion formation
(iv) formation of coloured ions
(v) catalysis
(g) Iron Extraction from sulphide and oxide ores, properties and uses, different forms of iron, their properties and advantages of steel over iron.
Test for Fe2+ and Fe3+
(h) Copper Extraction from sulphide and oxide ores, properties and uses of copper.
Preparation and uses of copper( II ) tetraoxosulphate(VI). Test for Cu2+
(i) Alloy Steel, stainless steel, brass, bronze, type-metal, duralumin, soft solder, permallory and alnico (constituents and uses only)
Candidates should be able to:
(i) specify the general properties of metals;
(ii) determine the method of extraction suitable for each metal;
(iii) relate the methods of extraction to the properties for the metals;
(iv) compare the chemical reactivities of the metals;
(v) specify the uses of the metals;
(vi) determine specific test for metallic ions;
(vii) determine the process for the production of the compounds of these metals;
(viii) compare the chemical reactivities of the compounds;
(ix) specify the uses of these compounds;
(x) specify the chemical composition of cement;
(xi) describe the method of purification of bauxite;
(xii) specify the ores of tin;
(xiii) relate the method of extraction to its properties;
(xiv) specify the uses of tin;
(xv) identify the general properties of the first transition metals;
(xvi) deduce reasons for the specific properties of the transition metals;
(xvii) determine the IUPAC names of simple transition metal complexes;
(xviii) determine the suitable method of extraction of iron;
(xix) specify the properties and uses of iron;
(xx) identify the different forms of iron, their compositions, properties and uses;
(xxi) identify the appropriate method of extraction of copper from its compounds;
(xxii) relate the properties of copper and its compound to their uses;
(xxiii) specify the method for the preparation of CuSO4;
(xxiv) specify the constituents and uses of the various alloys mentioned; and
(xxv) compare the properties and uses of alloys to pure metals.
16. Organic Compounds An introduction to the tetravalency of carbon, the general formula, IUPAC nomenclature and the determination of empirical formula of each class of the organic compounds mentioned below
(a) Aliphatic hydrocarbons
(i) Alkanes Homologous series in relation to physical properties, substitution reaction and a few examples and uses of halogenated products. Isomerism: structural only (examples on isomerism should not go beyond six carbon atoms).
Petroleum: composition, fractional distillation and major products; cracking and reforming, Petrochemicals – starting materials of organic syntheses, quality of petrol and meaning of octane number
(ii) Alkenes Isomerism: structural and geometric isomerism, additional and polymerization reactions, polythene and synthetic rubber as examples of products of polymerization and its use in vulcanization
(iii) Alkynes Ethyne – production from action of water on carbides, simple reactions and properties of ethyne
(b) Aromatic hydrocarbons e.g. benzene – structure, properties and uses
(c) Alkanols Primary, secondary, tertiary – production of ethanol by fermentation and from petroleum by-products. Local examples of fermentation and distillation, e.g.gin from palm wine and other local sources and glycerol as a polyhydric alkanol Reactions of OH group – oxidation as a distinguishing test among primary, secondary and tertiary alkanols (Lucas test)
(d) Alkanals and alkanones Chemical test to distinguish between alkanals and alkanones
(e) Alkanoic acids Chemical reactions; neutralization and esterification, ethanedioic (oxalic) acid as an example of a dicarboxylic acid and benzene carboxylic acid as an example of an aromatic acid
(f) Alkanoates Formation from alkanoic acids and alkanols – fats and oils as alkanoates Saponification:
Production of soap and margarine from alkanoates and distinction between detergents and soaps
(g) Amines (Alkanamines)- primary, secondary, and tertiary
(h) Carbohydrates Classification – mono-, di- and polysaccharides; composition, chemical tests for simple sugars and reaction with concentrated tetraoxosulphate (VI) acid.
Hydrolysis of complex sugars e.g. cellulose from cotton and starch from cassava, the uses of sugar and starch in the production of alcoholic beverages, pharmaceuticals and textiles
(i) Proteins:
Primary structures, hydrolysis and tests (Ninhydrin, Biuret, Millon’s and xanthoproteic) Enzymes and their functions
(j) Polymers:
Natural and synthetic rubber; addition and condensation polymerization.
Methods of preparation, examples and uses Thermoplastic and thermosetting plastics
Candidates should be able to:
(i) derive the name of organic compounds from their general formulae;
(ii) relate the name of a compound to its structure;
(iii) relate the tetravalency of carbon to its ability to form chains of compound (catenation);
(iv) classify compounds according to their functional groups;
(v) derive empirical formula and molecular formula from given data;
(vi) relate structure/functional groups to specific properties;
(vii) derive various isomeric forms from a given formula;
(viii) distinguish between the different types of isomerism;
(ix) classify the various types of hydrocarbons;
(x) distinguish each class of hydrocarbons by their properties;
(xi) specify the uses of various hydrocarbons;
(xii) identify crude oil as a complex mixture of hydrocarbons;
(xiii) relate the fractions of hydrocarbons to their properties and uses;
(xiv) relate transformation processes to quality improvement of the fractions;
(xv) distinguish between various polymerization processes;
(xvi) specify the process involved in vulcanization;
(xvii) specify chemical test for alkenes;
(xviii) specify chemical test for terminal alkynes;
(xix) distinguish between aliphatic and aromatic hydrocarbons;
(xx) relate the properties of benzene to its structure;
(xxi) compare the various classes of alkanols;
(xxii) determine the processes involved in ethanol production;
(xxiii) examine the importance of ethanol as an alternative energy provider;
(xxiv) distinguish the various classes of alkanols;
(xxv) differentiate between alkanals and alkanones;
(xxvi) compare the various types of alkanoic acids;
(xxvii) identify natural sources of alkanoates;
(xxviii) infer products of alkanoic acids and alkanols;
(xxix) specify the methods for the production of soap, detergent and margarine.
(xxx) distinguish between detergent and soap;
(xxxi) compare the various classes of alkanamine;
(xxxii) identify the natural sources of carbohydrates;
(xxxiii) compare the various classes of carbohydrates;
(xxxiv)infer the products of hydrolysis and dehydration of carbohydrates;
(xxxv) determine the uses of carbohydrates;
(xxxvi) specify the tests for simple sugars;
(xxxvii) identify the basic structure of proteins; (xxxviii) specify the methods and products of hydrolysis;
(xxxix) specify the various tests for proteins;
(xl) distinguish between natural and synthetic polymers;
(xli) differentiate between addition and condensation polymerization processes;
(xlii) classify natural and commercial polymers and their uses; and
(xliii) distinguish between thermoplastics and thermosetting plastics.
17. Chemistry and Industry Chemical industries: Types, raw materials and relevance. Biotechnology Candidates should be able to :
(j) classify chemical industries in terms of products;
(ii) identify raw materials for each industry;
(iii) distinguish between fine and heavy chemicals;
(iv) enumerate the relevance of each of these industries; and
(v) relate industrial processes to biotechnology.
18.Astronomical Chemistry Solar system, planets, satellite and the composition of the earth – atmosphere, lithosphere and hydrosphere Candidates should be able to :
(i) state the composition of the solar system;
(ii) list the planets;
(iii) identify the segments of the earth ;
(iv) name the natural satellite on the earth; and
(v) identify the smallest planet that is also the farthest from the sun.

RECOMMENDED TEXTS

1. Ababio, O. Y. (2009). New School Chemistry for Senior Secondary Schools (Fourth edition), Onitsha: Africana FIRST Publishers Limited.

2. Bajah, S.T., Teibo, B. O., Onwu, G. and Obikwere, A. Book 1 (1999). Senior Secondary Chemistry, Books 2 and 3 (2000). Lagos: Longman.

3. Ojokuku, G. O. (2012).Understanding Chemistry for Schools and Colleges, (Revised Edition), Zaria: Press-On Chemresources.

4. Odesina, I. A. (2008). Essential: Chemistry for Senior Secondary Schools, (2nd Edition), Lagos: Tonad Publishers Limited.

5. Uche, I. O., Adenuga, I. J. and Iwuagwu, S. L. (2003).Countdown to WASSCE/SSCE, NECO, JME Chemistry, Ibadan: Evans.

Topic-by-topic breakdown with worked examples

Topics 1–5: foundations of matter

These topics build the vocabulary and calculation skills the rest of the paper depends on.

  • Separation techniques: filtration, distillation, fractional distillation, crystallisation, chromatography, sublimation and magnetisation. Know which suits which mixture, and use boiling and melting points as tests for purity.
  • The mole concept: the syllabus bases relative atomic mass on 12C = 12. Practise mass–mole, volume–mole and particle–mole conversions.
  • Gas laws: Boyle’s, Charles’s, Graham’s law of diffusion, Dalton’s law of partial pressures and Avogadro’s law.
  • Atomic structure: electronic configuration, orbitals, the periodic table and trends, plus types of bonding and the shapes of simple molecules listed in the syllabus (H2O non-linear, CH4 tetrahedral, NH3 pyramidal).
  • Nuclear chemistry: types of radiation, half-life calculations and balancing nuclear equations.

Worked example (mole concept): How many moles are in 4.4 g of CO2? (C = 12, O = 16.) Molar mass = 12 + 32 = 44 g/mol. Moles = 4.4 ÷ 44 = 0.1 mol.

Worked example (Graham’s law): Which diffuses faster, hydrogen (H2 = 2) or oxygen (O2 = 32), and by how many times? Rate ratio = √(32/2) = √16 = 4. Hydrogen diffuses 4 times faster.

Worked example (half-life): A sample of 80 g has a half-life of 5 years. How much remains after 15 years? Three half-lives: 80 → 40 → 20 → 10 g.

Topics 6–10: solutions and reactions

  • Solubility: the syllabus defines solubility “in terms of mole per dm3“. Practise reading solubility curves and simple calculations.
  • Pollution: pollutants such as H2S, CO, SO2, oxides of nitrogen and chlorofluorocarbons; their sources, effects and control.
  • Acids, bases and salts: definitions (including acids as proton donors), pH, indicators, salt hydrolysis and acid–base titrations.
  • Redox: oxidation numbers, oxidising and reducing agents, and IUPAC naming of inorganic compounds.
  • Electrolysis: electrolysis of dilute H2SO4, aqueous CuSO4 and NaCl solutions, Faraday’s laws, and uses such as purification and electroplating.

Worked example (pH): What’s the pH of a solution with [H+] = 1 × 10⁻³ mol/dm³? pH = −log[H+] = 3.

Worked example (oxidation number): Find the oxidation number of Mn in KMnO4. K = +1, O = −2 × 4 = −8. So +1 + Mn − 8 = 0, giving Mn = +7.

Worked example (Faraday’s law): What mass of copper is deposited when 0.2 mol of electrons passes through CuSO4 solution? (Cu = 64.) Cu2+ + 2e⁻ → Cu, so 2 mol of electrons deposit 64 g. 0.2 mol deposits 6.4 g.

Topics 11–13: physical chemistry

  • Energy changes: exothermic (−∆H) and endothermic (+∆H) reactions, energy profile diagrams, and spontaneity using ∆G = ∆H − T∆S.
  • Rates: effects of temperature, concentration/pressure, surface area and catalysts, with examples named in the syllabus (thiosulphate and acid, the iodine clock, decomposition of H2O2).
  • Equilibrium: Le Chatelier’s principle and the equilibrium constant for simple reactions.

Worked example (spontaneity): For a reaction, ∆H = −40 kJ/mol and ∆S = −0.1 kJ/mol K. Is it spontaneous at 300 K? ∆G = ∆H − T∆S = −40 − (300 × −0.1) = −40 + 30 = −10 kJ/mol. ∆G is negative, so the reaction is spontaneous.

Worked example (Le Chatelier): For N2 + 3H2 ⇌ 2NH3 (exothermic), what happens to the yield of ammonia if pressure is increased? There are 4 moles of gas on the left and 2 on the right. Increasing pressure favours the side with fewer moles, so the yield of ammonia increases.

Topics 14–18: descriptive, organic and applied chemistry

Non-metals (topic 14): hydrogen, halogens, oxygen and ozone, water, sulphur and its compounds, nitrogen and its compounds, and carbon and its compounds. This topic is full of “test for” objectives: tests for Cl−, S2−, SO42−, NH4+, NO3−, CO32− and HCO3−. Make a single table of ions, reagents and observations and revise it often.

Metals (topic 15): general properties, extraction (for example, aluminium by electrolysis), and compounds of sodium, calcium, aluminium, tin, iron and copper, including alloys and tests for ions such as Na+, Ca2+ and Al3+.

Organic compounds (topic 16): the largest topic. It covers alkanes (including petroleum, cracking and octane number), alkenes, alkynes, benzene, alkanols, alkanals and alkanones, alkanoic acids, alkanoates (soap and margarine), amines, carbohydrates, proteins and polymers. The syllabus limits isomerism examples to six carbon atoms.

Worked example (empirical formula): A hydrocarbon contains 85.7% carbon and 14.3% hydrogen. Find its empirical formula. C: 85.7 ÷ 12 = 7.14; H: 14.3 ÷ 1 = 14.3. Ratio 7.14 : 14.3 = 1 : 2. Empirical formula = CH2.

Worked example (naming): What is the IUPAC name of CH3CH2OH? Two carbons with an –OH group: ethanol.

Chemistry and industry (topic 17): types of chemical industries, raw materials, fine versus heavy chemicals, and links to biotechnology.

Astronomical chemistry (topic 18): the solar system, planets, satellites and the composition of the earth (atmosphere, lithosphere and hydrosphere). One objective asks you to “identify the smallest planet that is also the farthest from the sun”. That description traditionally referred to Pluto, which the International Astronomical Union reclassified as a dwarf planet in 2006. Today Mercury is the smallest planet and Neptune the farthest from the sun. Learn both the traditional answer and the current classification, then read each option carefully on the day. The earth’s natural satellite is the Moon.

Ion tests cheat sheet (topics 14 and 15)

The syllabus repeatedly asks you to “determine specific tests” for ions. These tests are spread across two long topics, so candidates often learn them in pieces and forget them. Here they are in one place. Learn the reagent and the observation as a pair.

Ion Test Positive result
Cl− Add dilute HNO3, then AgNO3 solution White precipitate, soluble in aqueous ammonia
SO42− Add dilute HCl, then BaCl2 solution White precipitate, insoluble in excess acid
CO32− Add dilute acid Effervescence; the gas turns limewater milky (CO2)
S2− Add dilute acid H2S gas with a rotten-egg smell; turns lead(II) ethanoate paper black
NO3− Brown ring test: FeSO4 solution, then concentrated H2SO4 down the side Brown ring at the junction of the liquids
NH4+ Warm with NaOH solution Ammonia gas, which turns damp red litmus blue
Fe2+ Add NaOH solution Green precipitate
Fe3+ Add NaOH solution Reddish-brown precipitate
Cu2+ Add aqueous ammonia, then excess Blue precipitate, dissolving in excess to give a deep blue solution
Al3+ Add NaOH solution, then excess White precipitate, soluble in excess NaOH
Ca2+ Flame test Brick-red flame
Na+ Flame test Golden-yellow flame

A useful exam habit: when a question describes an observation (“a white precipitate soluble in excess”), go straight to your cheat sheet and eliminate ions that don’t match. Several options can usually be ruled out in seconds.

Organic chemistry: the functional groups at a glance

Topic 16 is easier when you see it as a family tree. Each class has a functional group, a general formula and a few key reactions the syllabus names.

Class Functional group / general formula Reactions and facts the syllabus highlights
Alkanes CnH2n+2 Substitution; petroleum fractions; cracking and reforming; octane number
Alkenes C=C; CnH2n Addition and polymerisation; structural and geometric isomerism; test for alkenes
Alkynes C≡C; CnH2n−2 Ethyne from carbides and water; test for terminal alkynes
Benzene Aromatic ring Structure, properties and uses
Alkanols –OH Primary, secondary and tertiary; ethanol by fermentation; oxidation
Alkanals and alkanones –CHO and C=O Chemical test to tell them apart
Alkanoic acids –COOH Neutralisation and esterification; ethanedioic acid; benzene carboxylic acid
Alkanoates –COO– Fats and oils; saponification; soap, detergent and margarine
Amines –NH2 Primary, secondary and tertiary
Carbohydrates, proteins, polymers Natural macromolecules Tests for sugars and proteins; addition and condensation polymerisation; thermoplastics and thermosets

If you can fill in this table from memory, you’ve covered the backbone of the largest topic in the Chemistry syllabus.

A 10-week study plan built on the syllabus

Week Topics Checkpoint
1 1–2: separation, chemical combination, mole concept Mole conversions and stoichiometry without hesitation
2 3–5: gas laws, atomic structure and bonding, nuclear chemistry Electronic configuration; shapes of molecules; half-life
3 6–8: solubility, pollution, acids, bases and salts Solubility curves; pH; titration calculations
4 9–10: redox and electrolysis Oxidation numbers; Faraday’s laws
5 11–13: energy changes, rates, equilibria ∆G calculations; Le Chatelier’s principle
6 14: non-metals and their compounds Ion test table memorised
7 15: metals and their compounds Extraction methods; alloys; ion tests for metals
8 16: organic compounds (hydrocarbons, alkanols, acids) Naming; isomers; reactions of functional groups
9 16 (continued), 17–18: carbohydrates, proteins, polymers, industry, astronomical chemistry Food tests; polymer types; solar system facts
10 Full revision and timed CBT practice Two full 40-question sets; map errors to objectives

For a list of the areas candidates should focus on, see JAMB Chemistry key topics. If you’re balancing Chemistry with other sciences, our reading timetable for science students can help you plan.

Recommended textbooks and how to use them

The recommended texts at the end of the syllabus include widely used senior secondary Chemistry textbooks. Use one main textbook to learn each topic and one revision book for practice questions. Let the syllabus decide your depth: if a textbook goes further than the “Objectives” column, you can skim that part.

Common mistakes candidates make in JAMB Chemistry

  1. Weak mole concept. It underpins gas volumes, titrations, electrolysis and empirical formulas. Fix it first.
  2. Not learning ion tests systematically. They’re scattered across topics 14 and 15 but tested often.
  3. Confusing similar names. Trioxosulphate(IV) and tetraoxosulphate(VI) are different; read IUPAC names carefully.
  4. Ignoring the newer topics. Chemistry and industry and astronomical chemistry are short. Don’t leave free marks behind.
  5. Forgetting units and conditions. Use dm³ and mol/dm³, and note s.t.p. conditions in gas questions.
  6. Not practising under CBT conditions. Our JAMB CBT guide explains what to expect.

Who needs Chemistry in JAMB?

Chemistry is required for most medical, pharmaceutical, engineering, agricultural and science courses. Check your exact course requirements in the JAMB brochure, and see our guides to JAMB subject combinations and combinations for medicine, engineering and nursing.

Is this the latest JAMB Chemistry syllabus?

This page reproduces JAMB’s official Chemistry syllabus file. JAMB updates syllabuses occasionally and announces changes on its official platforms. Before your exam, confirm the current version on jamb.gov.ng or JAMB’s e-brochure on ibass.jamb.gov.ng. For 2027, JAMB has proposed holding the UTME between 15 and 25 March, subject to official confirmation.

Free: JambSmartPrep UTME Readiness Hub

Test yourself on these Chemistry topics with free UTME-style practice questions. Every answer comes with an explanation and a link back to the right part of the syllabus.

Practise Chemistry questions →

Frequently asked questions about the JAMB Chemistry syllabus

How many topics are in the JAMB Chemistry syllabus?

Eighteen, from Separation of Mixtures and Purification of Chemical Substances to Astronomical Chemistry.

How many questions are in UTME Chemistry?

Chemistry is widely set at 40 questions, like the other non-English subjects. Use of English has 60.

What is astronomical chemistry in the JAMB syllabus?

Topic 18 covers the solar system, planets, satellites and the composition of the earth’s atmosphere, lithosphere and hydrosphere. It’s short and mostly factual.

Is organic chemistry important for JAMB?

Yes. Organic compounds is the longest topic in the syllabus, covering hydrocarbons, alkanols, acids, esters, amines, carbohydrates, proteins and polymers.

Do I need to memorise the periodic table?

The syllabus says specific examples on atomic structure “should be drawn from elements of atomic number 1 to 20”, so know those 20 elements well. You also need the main families (alkali and alkaline-earth metals, halogens, noble gases, transition metals) and the trends in ionisation energy, ionic radii, electron affinity, electronegativity and conductivity.

Which calculations should I master?

Mole concept, gas laws (including Graham’s law), solubility, titration, electrolysis (Faraday’s laws), energy changes (including ∆G), half-life and empirical formulas.

Is the JAMB Chemistry syllabus the same as WAEC’s?

The content overlaps, but WAEC includes a practical paper and its own syllabus document. JAMB’s syllabus also includes topics like astronomical chemistry. Use the JAMB syllabus for the UTME.

Where can I find the official JAMB Chemistry syllabus?

On JAMB’s official platforms, including its website and e-brochure. This page reproduces the official text in full.

Related guides: JAMB Chemistry key topics · JAMB areas of concentration · How many questions JAMB sets · How to use the JAMB syllabus