JAMB CBT time management comes down to one number: you have 2 hours for 180 questions, which is 40 seconds per question on average. To finish on time, give each subject a time budget (for example about 40 minutes for Use of English and about 25 minutes for each of your other three subjects, leaving about 5 minutes to review), answer easy questions first and skip slow ones, check the on-screen timer at fixed checkpoints, and make sure every question has an answer before the end, because there’s no negative marking. Speed isn’t a talent. It’s built through weeks of timed practice on a computer.

This guide breaks the two hours down in detail. It shows how to set a time budget that fits your strengths, the three-pass method that stops hard questions eating your time, speed tactics for each subject, how to read faster on screen, how to handle calculations without wasting minutes on the on-screen calculator, what to do if you fall behind, and a 4-week training plan that steadily raises your speed and accuracy together.

Quick answer: how to finish 180 JAMB questions in 2 hours

  1. Know the maths: 120 minutes รท 180 questions = 40 seconds per question on average.
  2. Budget by subject: roughly 40 minutes for English (60 questions), 25 minutes each for the others (40 questions), 5 minutes for review.
  3. Use three passes: answer quick questions first, return to medium ones, then make best choices on the rest.
  4. Set checkpoints on the on-screen timer and check them.
  5. Use the keyboard (letter keys, N for next) to save seconds per question.
  6. Estimate before calculating to reduce calculator use.
  7. Never leave a question blank.
  8. Train weekly with full 2-hour mocks on a computer.

In this guide:

Table of Contents

The time maths of the UTME

The UTME has 180 questions in four subjects: 60 in Use of English and 40 in each of your three other subjects, all in a single two-hour sitting. You can move freely between subjects, which means you decide how to divide the time. That freedom is useful, but it also means a poorly managed candidate can spend an hour on English and rush everything else.

Item Number
Total time 120 minutes (7,200 seconds)
Total questions 180
Average per question 40 seconds
Use of English 60 questions; at 40 seconds each, 40 minutes
Each other subject 40 questions; at 40 seconds each, about 27 minutes

But the average hides a lot. Some questions take 10 seconds (a definition you know, a simple synonym). Others take two minutes (a long calculation, a passage question). The goal isn’t to spend 40 seconds on every question; it’s to bank time on quick questions so you can afford the slow ones.

Why each mark matters differently

Each subject is scored out of 100, but English has 60 questions while each other subject has 40. That means each English question is worth less than a question in your other subjects. JAMB doesn’t publish an official formula, but on the commonly cited estimate, an English question is worth about 1.67 marks and a question in another subject about 2.5 marks. This matters for time: spending three minutes on one hard English question is especially costly. See how JAMB calculates scores.

Why so many candidates run out of time

Running out of time is one of the most common complaints after the UTME, and it usually isn’t because candidates are slow thinkers. It happens for a handful of predictable reasons, and each one can be fixed before exam day.

They answer in order. Working from question 1 to question 60 in English, and then question 1 to 40 in each subject, means you meet hard questions at random points and feel obliged to solve them before moving on. One stubborn question early in a subject can cost three or four minutes, and a few of those across the paper add up to a lost subject’s worth of time.

They’ve never sat a full two-hour mock. Many candidates practise past questions without a clock, or only in short bursts. They know the content, but they’ve never experienced the fatigue of the second hour or learned how long their reading and calculations really take. The first time they feel that pressure is in the real hall.

They aren’t fluent with the computer. Small delays in finding the mouse pointer, scrolling, or working out how to move between questions add seconds to every question. Over 180 questions, those seconds become minutes.

They don’t watch the timer. Absorbed in the questions, they look up with 15 minutes left and a whole subject untouched.

They over-check. Anxious candidates sometimes re-read every answer, spending time on questions they already got right instead of on questions they haven’t attempted.

Every technique in this guide targets one of these causes. If you recognise yourself in more than one, start with full timed mocks; they reveal the rest.

Speed versus accuracy: finding the balance

Time management isn’t about rushing. A candidate who rushes through everything in 90 minutes and gets half wrong will score less than one who uses all 120 minutes well. The aim is to spend the right amount of time on each question: less on what you know, more on what you can work out, and as little as possible on what you can’t.

In practice, accuracy usually dips a little when you first start timing yourself, then recovers as speed becomes natural. Don’t be discouraged if your first few timed mocks score slightly lower than untimed practice. That’s normal. Keep training, and within two or three weeks most candidates find they’re both faster and more accurate than before, because timed practice forces them to recognise question types quickly.

Setting your subject time budget

A time budget is a plan for how many minutes you’ll spend on each subject. Without one, candidates drift. With one, you know at every moment whether you’re on track.

The standard budget

Subject Questions Time budget Per question
Use of English 60 38โ€“40 minutes About 38โ€“40 seconds
Subject 2 40 25 minutes About 37 seconds
Subject 3 40 25 minutes About 37 seconds
Subject 4 40 25 minutes About 37 seconds
Review โ€” 5โ€“7 minutes Skipped and uncertain questions

Adjusting the budget to your strengths

The standard budget is a starting point. Adjust it based on your mock results:

  • A fast, strong subject (for many candidates, Biology or Government) might need only 18โ€“20 minutes, freeing time elsewhere.
  • A calculation-heavy subject (Mathematics, Physics, Chemistry, Accounting) often needs 28โ€“30 minutes.
  • A weak subject may need more time, but be careful: spending extra time on questions you don’t know rarely pays. It’s often better to answer what you can and guess the rest.

Example budgets

Candidate Budget
Science (English, Maths, Physics, Chemistry) English 36 ยท Maths 28 ยท Physics 27 ยท Chemistry 24 ยท Review 5
Science (English, Biology, Chemistry, Physics) English 38 ยท Biology 20 ยท Chemistry 28 ยท Physics 28 ยท Review 6
Arts (English, Literature, Government, CRS) English 40 ยท Literature 28 ยท Government 24 ยท CRS 20 ยท Review 8
Commercial (English, Maths, Economics, Commerce) English 38 ยท Maths 30 ยท Economics 25 ยท Commerce 20 ยท Review 7

Test your budget in at least two full mocks, then adjust. Write your final budget down and memorise it before exam day.

Which subject to start with

You can answer subjects in any order. There’s no single right choice, but each approach has a logic.

Start withโ€ฆ Advantage Risk
Use of English It’s the biggest section; you’re freshest for long passages Can overrun if you get stuck on passages
Your strongest subject Builds confidence and banks time quickly None major, if you keep to the budget
Your calculation subject Hard thinking while your mind is fresh Slow start can cause anxiety
Your weakest subject Gets it out of the way Often drains confidence and time early

Many candidates do best starting with either English or their strongest subject. Whatever you choose, practise the same order in your mocks so it feels routine on exam day.

The three-pass method

The three-pass method is the single most effective time-management technique for the UTME. It stops you spending three minutes on a question while easy marks sit unanswered later in the paper.

Pass 1: Quick wins

Go through each subject from the first question. If you know the answer or can work it out in under about 40 seconds, answer it and move on. If a question looks long, confusing or calculation-heavy, skip it and make a mental note of its number. By the end of pass 1, you should have answered most questions.

Pass 2: Medium questions

Return to the questions you skipped, using the question number grid. Many will now seem easier, because you’re warmed up or because another question jogged your memory. Spend up to a minute or so on each.

Pass 3: Best choices

For anything still unanswered, eliminate what you can and pick the most likely option. Never leave a blank.

Doing the passes subject by subject

Most candidates find it easier to do all three passes within a subject before moving on, rather than going through all four subjects three times. For example: English pass 1, pass 2, pass 3, then Biology pass 1, 2, 3, and so on. This keeps your mind in one subject at a time. Leave your final review minutes to check that no subject has unanswered questions.

How to know when to skip

Skip if any of these is true:

  • You’ve read the question twice and still don’t know what it’s asking.
  • It needs a long calculation and you’re not sure of the method.
  • It’s a long passage question and you’re early in the subject.
  • You’ve spent about a minute and you’re not close to an answer.

Timer checkpoints

Wristwatches are banned, so the on-screen timer is your only clock. Set checkpoints before the exam and check them. Here’s an example based on the standard budget, starting with English:

Timer shows You should beโ€ฆ
1:20:00 remaining Finishing English
0:55:00 remaining Finishing subject 2
0:30:00 remaining Finishing subject 3
0:05:00 remaining Finishing subject 4; starting final review
0:01:00 remaining Every question answered

If you’re more than about five minutes behind at a checkpoint, speed up: skip more readily and save hard questions for later. If you’re ahead, don’t slow down; bank the time for review.

Speed tactics for each subject

Use of English

  • Answer short questions first: synonyms, antonyms, sentence completion, idioms and oral English are quick.
  • For passages, read the questions first, then scan for the relevant lines.
  • Recommended text questions are fast if you’ve read the book well, and slow if you haven’t. Read the full text before the exam.
  • Oral English (vowel sounds, stress, rhyme) is quick for candidates who’ve practised and slow for those who haven’t. Practise it.

See Use of English areas of concentration.

Mathematics

  • Start with direct questions: simple indices, sets, number bases, definitions.
  • Estimate first: many options can be eliminated by rough calculation.
  • Substitute options: for equations, try plugging options in instead of solving fully.
  • Skip long multi-step problems on pass 1.

See JAMB Mathematics areas of concentration.

Physics

  • Know formulas cold so you don’t waste time recalling them.
  • Check units in the options; often only one option has the right unit.
  • Answer concept questions first, calculations second.

See JAMB Physics topics.

Chemistry

  • Recall questions (periodic trends, organic reactions, industrial processes) are fast; do them first.
  • For mole and gas-law calculations, set up the ratio quickly and estimate.

See JAMB Chemistry topics.

Biology

  • Usually the fastest science subject for well-prepared candidates. Bank time here.
  • Look at diagram labels carefully before answering.

See JAMB Biology topics.

Arts and commercial subjects

  • Government, CRS/IRS and Commerce are mostly recall; move quickly.
  • Literature extracts and poems take longer; read the question first.
  • Economics and Accounting calculations: estimate, then calculate only if needed.

Reading faster on screen

Reading speed affects every subject, but especially English. Reading on a screen is slower than on paper for many people at first, which is why practice on a computer matters.

  • Read the question stem carefully, then the options. Many errors come from misreading the stem, not from lack of knowledge.
  • Watch for key words like NOT, EXCEPT, LEAST, MOST, which reverse the question.
  • Skim passages for structure: what each paragraph is about. Then go back for details as questions require.
  • Don’t re-read the whole passage for each question. Go to the relevant paragraph.
  • Read widely in the months before the exam: newspapers, novels, the recommended text. General reading speed improves with volume.

Calculations and the on-screen calculator

Personal calculators are banned, so you’ll use the on-screen calculator in the CBT software. It’s slower than a handheld calculator because you operate it with the mouse. That makes calculation strategy important.

  • Estimate first. If the options are 2.4, 24, 240 and 2,400, a rough estimate is often enough.
  • Use mental arithmetic for simple steps: multiplication by 10, simple fractions, percentages like 10%, 25%, 50%.
  • Memorise common values: squares to 20ยฒ, cubes to 10ยณ, common square roots, ฯ€ โ‰ˆ 3.14 or 22/7.
  • Save the calculator for genuinely awkward numbers.
  • Practise with the on-screen calculator in your CBT software so it isn’t new on the day.

Building speed through knowledge

The fastest way to answer a question is to already know the answer. Many “time” problems are really knowledge problems in disguise: a candidate spends two minutes on a question because they half-know the topic and keep second-guessing themselves. Strong syllabus coverage, frequent past-question practice and a mistakes notebook all make you faster, because more questions become instant recognition rather than slow reasoning.

This is why the best time-management plan combines timed practice with steady content work. Use the JAMB syllabus to make sure no topic is completely new on exam day (see how to use the JAMB syllabus), and use past questions to learn the patterns JAMB uses for each topic. When you see a familiar question pattern, you’ll know the method immediately and save the time you’d otherwise spend working out what to do.

Short notes help here too. A one-page formula sheet for each calculation subject, a list of common synonyms and antonyms, and a summary of the recommended text’s characters and events let you revise the facts that come up most often in minutes rather than hours. The more automatic these facts become, the more time you have for the questions that genuinely need thought.

Smart guessing

There’s no negative marking in the UTME, so a guess can only help. But an educated guess is better than a random one.

  • Eliminate clearly wrong options first. Removing one option raises your odds from 25% to 33%; removing two raises it to 50%.
  • Check units and magnitudes in calculation questions.
  • Look for extreme words like “always” and “never” in theory options; they’re often wrong.
  • If two options are opposites, one of them is often correct.
  • Don’t change a confident answer to a guess at the last minute.

What to do if you fall behind

Even well-prepared candidates sometimes fall behind, perhaps because of a hard English passage or a stubborn calculation. Don’t panic. Use this plan:

  1. Check how far behind you are at your next checkpoint.
  2. Switch to “quick wins only” mode: answer only questions you can do in under 30 seconds.
  3. Move to your fastest remaining subject to bank marks quickly.
  4. With 5 minutes left, go through every subject’s question grid and answer every blank with your best guess.

A candidate who answers 160 questions carefully and guesses 20 almost always scores more than one who answers 140 carefully and leaves 40 blank.

The final review: making the last minutes count

Your last five to seven minutes are valuable. Use them in this order:

  1. Find blanks. Open each subject and scan the question number grid for unanswered questions. Answer every one, even with a quick guess.
  2. Return to flagged questions. If you made a note of questions you were unsure about, look at them again now that you’re not under pressure from the rest of the paper.
  3. Check for misreads. If time allows, look again at questions with NOT or EXCEPT in the stem, which are the easiest to get wrong by reading too fast.
  4. Leave confident answers alone. Changing answers you were sure about, on a last-minute hunch, often turns right answers into wrong ones.

When the timer reaches zero, the system submits automatically, so you don’t need to rush the submit button in the final seconds. Focus on making sure no question is blank.

Common time traps

Trap Why it happens Fix
Stuck on one question Pride or panic One-minute rule: skip and return
Long English passages early Doing questions in order Answer short questions first
Calculator overuse Lack of mental arithmetic practice Estimate first; drill arithmetic
Forgetting a subject Not checking subject tabs Final review of every subject
Slow navigation No CBT practice Keyboard rhythm; practise the grid
Re-checking every answer Anxiety Only re-check flagged questions
Not watching the timer Absorbed in questions Fixed checkpoints

For more on avoidable errors, see common mistakes candidates make during the UTME.

Using the keyboard to save time

Candidates and CBT trainers commonly report that the UTME software accepts the letter keys A, B, C and D to select options, N for the next question and P for the previous one, with S to submit after a confirmation step. Always follow the on-screen instructions on the day. A smooth “read, press letter, press N” rhythm saves a second or two per question compared with moving the mouse, which over 180 questions adds up to several minutes. See JAMB CBT for beginners.

A 4-week speed training plan

Speed comes from practice. This plan assumes you’ve covered most of the syllabus already. If not, combine it with topic study.

Week Training Goal
1 Timed subject sets: 40 questions in 25 minutes; 60 English in 40 minutes. Daily. Finish each set on time, even if accuracy dips
2 Two full 2-hour mocks; test your subject budget and order Finish all 180 with 3โ€“5 minutes to spare
3 Two full mocks; practise the three-pass method and checkpoints strictly Improve accuracy while keeping time
4 One or two full mocks early in the week; light drills after Lock in your routine; rest before the exam

Speed drills you can do daily

  • The 10-question sprint: 10 questions in 5 minutes, any subject.
  • Oral English blitz: 20 stress or vowel questions in 6 minutes.
  • Mental maths warm-up: 15 quick arithmetic questions without a calculator.
  • Passage scan: read the questions first, then find answers in a passage in under 4 minutes.

Review after every mock

After each full mock, record: your score per subject, how many questions you didn’t reach, where you were at each checkpoint, and which questions took longest. Over time, you’ll see exactly where your time goes. See JAMB CBT practice guide and how to use JAMB past questions.

Worked example: turning a time problem into marks

Ifeoma’s first full mock was 187. She finished English and Biology comfortably, but ran out of time in Chemistry and Physics, leaving 31 questions unanswered. Her knowledge wasn’t the main problem; her time was.

She set a budget (English 36, Biology 20, Chemistry 30, Physics 30, review 4), started with Biology to bank time, used the three-pass method in Chemistry and Physics, and drilled mental arithmetic for 10 minutes a day. Three weeks later, she was finishing every mock with a few minutes to spare. Even guessing the questions she couldn’t solve added marks, and her total rose into the 220s without her learning much new content. Many candidates have the same hidden time problem; fixing it is one of the fastest ways to raise a score.

Time management for different candidates

First-time candidates

Your biggest risk is unfamiliarity with the format. Prioritise CBT fluency and at least three full timed mocks. Start with the standard budget and adjust only after you’ve seen your mock results. See how to prepare for the UTME as a first-time candidate.

Repeating candidates

Look back honestly at your last UTME. Did you leave questions unanswered? Which subject did you rush? If time was the problem, your fastest improvement may come from time management alone. Build your budget around the subject you rushed, and practise the three-pass method until it’s automatic.

Candidates aiming for 280+

At the top end, you can’t afford to lose many questions to time. High scorers typically finish with several minutes to review, because they answer known questions in well under 40 seconds. Drill speed on your strongest subject so you can bank 5โ€“8 minutes for the hardest questions in your calculation subjects. See how to boost your JAMB score.

Candidates who get anxious under time pressure

Anxiety makes time feel shorter and thinking slower. Familiarity is the best cure: the more timed mocks you sit, the less threatening the clock feels. Use slow breathing when you notice panic, and remember that a few skipped questions are part of the plan, not a failure. See how to stay calm during the JAMB exam.

Time management on exam day

  • Arrive early so you’re calm when the timer starts. For the 2027 UTME’s first session, JAMB announced arrival by 7:30am for an 8:30am start.
  • Use the first minute to confirm your details and subjects, then start your planned subject.
  • Stick to your budget and checkpoints.
  • Don’t watch other candidates. Their speed tells you nothing about your questions.
  • Use every minute. There’s no reward for finishing early.

See how to prepare for JAMB exam day and how to stay calm during the exam.

Free: JambSmartPrep UTME Readiness Hub

Test yourself with today’s free 10-question UTME quiz. Every answer comes with an explanation, and the hub tracks your streak and your weakest topics.

Take today’s UTME quiz →

Frequently asked questions

How many minutes per question in JAMB?

On average, 40 seconds: 120 minutes for 180 questions. In practice, quick questions take less and hard ones more.

How long should I spend on Use of English?

About 36โ€“40 minutes for 60 questions is a common budget. Adjust based on your mock results.

Should I answer questions in order?

Not necessarily. Answer quick questions first and come back to hard ones using the question grid.

Is there negative marking in JAMB?

No, so answer every question, even with a guess.

What if I run out of time in JAMB?

The system submits automatically. Any question without an answer scores nothing, so leave time to fill every blank.

Can I go back to a subject after leaving it?

Yes. You can switch between subjects freely until you submit.

Should I submit early if I finish?

Only after reviewing skipped and uncertain questions. Use all the time you have, because a single corrected answer in the final minutes can be worth more than two marks.

How do I get faster at JAMB questions?

Timed practice on a computer, mental arithmetic drills, reading practice and the three-pass method. Weekly full mocks in the final month make the biggest difference.

Which subject should I start with in JAMB?

Many candidates start with English or their strongest subject. Choose one and practise it consistently in mocks.

How many questions should I aim to answer in pass 1?

Most well-prepared candidates answer around 70โ€“85% of questions on the first pass. If you’re answering far fewer, you may be skipping too much or need more content practice; if you’re answering everything on pass 1 but running out of time, you’re probably not skipping enough.

Does the JAMB timer show on screen?

Yes. A countdown timer is shown on screen. Wristwatches are banned, so this is your only clock.

Related guides: JAMB CBT for beginners ยท JAMB CBT practice guide ยท How many questions JAMB sets ยท How to pass JAMB